[X3 F25 AC]

Hi

New to the forum, I have looked around and cannot find answers to this query so apologies if this has been asked.

The drivers side jet washer to the underside of the bonnet is currently working at 30% in comparison to the passenger side. I have looked for a replacement washer component but cannot find one. Does the whole nozzle and jet washer system need replacing ?

X3 F25 2012 M Sport model

Thanks

[dtox9]

Welcome to the forum...

Have you confirmed that that nozzle itself hasn't become damaged or clip broken resulting in the spray hitting lower on the windshield than normal?

Also, maybe look for a crack in the line possibly leaking slightly when under pressure during use?

realoem.com can help you identify parts if needed

[e30lover318i]

For some reason they always put it in electrical, this site is very helpful if you didn’t know about it.

https://www.realoem.com/bmw/enUS/sho...diagId=61_2743

[X3 F25 AC]

Originally Posted by e30lover318i

For some reason they always put it in electrical, this site is very helpful if you didn’t know about it.

https://www.realoem.com/bmw/enUS/sho...diagId=61_2743

Thanks

[X3 F25 AC]

Originally Posted by dtox9

Welcome to the forum...

Have you confirmed that that nozzle itself hasn't become damaged or clip broken resulting in the spray hitting lower on the windshield than normal?

Also, maybe look for a crack in the line possibly leaking slightly when under pressure during use?

realoem.com can help you identify parts if needed

Thanks dtox, I have checked and there are no leaks or loose components which leads me to believe it must be something within the nozzle on the drivers side. I have look everywhere and don't believe the nozzles can be locally replaced, therefore leaving me with the option of replacing the wholes jet washer nozzle system 🙈. Which is advertised on eBay for £99.

[littleob]

try blowing out the line with compressed air before you spend any cash. It could be somthing partially blocking it. Start at the nosal and blow back to the washer tank

[X3 F25 AC]

Originally Posted by littleob

try blowing out the line with compressed air before you spend any cash. It could be somthing partially blocking it. Start at the nosal and blow back to the washer tank

Thanks mate, il give that a go