BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      02-17-2013, 06:42 AM   #529
thecam
Enlisted Member
Italy
6
Rep
38
Posts

Drives: X3 M-sport
Join Date: Dec 2011
Location: Italy

iTrader: (0)

Hi to all!!!
Finally I have solved why I couldn't aktivate ass (auto start and stop memory) on my car;my car software was old so my cas cic ecc are different from description in the forum.Now after service update finally all works fine!
But all of this things was not possible without the great work of April1 and the very very very BIG help from Shawnsheridan.

SO VERY BIG THX TO YOU APRIL1 AND SHAWNSHERIDAN YOU MAKE TO US POSSIBLE WHAT WAS ONLY A DREAM!!!
Appreciate 0
      02-17-2013, 08:57 AM   #530
shawnsheridan
General
shawnsheridan's Avatar
United_States
10339
Rep
40,296
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by thecam View Post
Hi to all!!!
Finally I have solved why I couldn't aktivate ass (auto start and stop memory) on my car;my car software was old so my cas cic ecc are different from description in the forum.Now after service update finally all works fine!
But all of this things was not possible without the great work of April1 and the very very very BIG help from Shawnsheridan.

SO VERY BIG THX TO YOU APRIL1 AND SHAWNSHERIDAN YOU MAKE TO US POSSIBLE WHAT WAS ONLY A DREAM!!!
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-17-2013, 01:29 PM   #531
lbjgh
Lieutenant Colonel
lbjgh's Avatar
Canada
104
Rep
1,511
Posts

Drives: 2013 AW X3 M-Sport
Join Date: Dec 2011
Location: North of Toronto

iTrader: (0)

+1
Shawn and April have been a great help to our online community.
Quote:
Originally Posted by thecam View Post
Hi to all!!!
Finally I have solved why I couldn't aktivate ass (auto start and stop memory) on my car;my car software was old so my cas cic ecc are different from description in the forum.Now after service update finally all works fine!
But all of this things was not possible without the great work of April1 and the very very very BIG help from Shawnsheridan.

SO VERY BIG THX TO YOU APRIL1 AND SHAWNSHERIDAN YOU MAKE TO US POSSIBLE WHAT WAS ONLY A DREAM!!!
__________________
2013, AW, xDrive35i, M Sport Package, Technology Package, Dynamic Comfort Package, Premium Package, 3M Clear Bra, Euro foglight switch, a few coded fixes
Appreciate 0
      02-17-2013, 01:30 PM   #532
shawnsheridan
General
shawnsheridan's Avatar
United_States
10339
Rep
40,296
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by lbjgh View Post
+1
Shawn and April have been a great help to our online community.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      02-18-2013, 04:52 PM   #533
thecam
Enlisted Member
Italy
6
Rep
38
Posts

Drives: X3 M-sport
Join Date: Dec 2011
Location: Italy

iTrader: (0)

A question.....
I have a trouble when I look a DVD in car, the volume is too low.... Do you know if it possible to code volume limit ? I think it is a value stored somewhere.Someone has found a solution?
Appreciate 0
      02-21-2013, 11:18 AM   #534
droftrah
Private First Class
United_States
61
Rep
182
Posts

Drives: '18 G01 X3 M40i
Join Date: Oct 2012
Location: Baltimore, MD

iTrader: (0)

Garage List
Quote:
Originally Posted by April1 View Post
If you want to push the saved cafd file to CIC, after selecting the green labeled cafd file, in place of reading the coding data, click on New and proceed to pick the corresponding saved cafd file and follow the remaing steps like activating FA.......

These steps have been discussed many times in this thread.

Success in the coding lies if you have patience and follow the steps correctly. It's good that you have saved your original cafd files.
I tried this but the settings haven't changed..?

Do I need to delete the old fdl/ncd file first?
Appreciate 0
      02-21-2013, 08:19 PM   #535
lbjgh
Lieutenant Colonel
lbjgh's Avatar
Canada
104
Rep
1,511
Posts

Drives: 2013 AW X3 M-Sport
Join Date: Dec 2011
Location: North of Toronto

iTrader: (0)

I think there is a setting hidden in one of the menus if I remember correctly. ... Let me have a look.
Quote:
Originally Posted by thecam View Post
A question.....
I have a trouble when I look a DVD in car, the volume is too low.... Do you know if it possible to code volume limit ? I think it is a value stored somewhere.Someone has found a solution?
__________________
2013, AW, xDrive35i, M Sport Package, Technology Package, Dynamic Comfort Package, Premium Package, 3M Clear Bra, Euro foglight switch, a few coded fixes
Appreciate 0
      02-23-2013, 12:35 PM   #536
thecam
Enlisted Member
Italy
6
Rep
38
Posts

Drives: X3 M-sport
Join Date: Dec 2011
Location: Italy

iTrader: (0)

Ok tanks lbjgh let me know if you remember it....
Appreciate 0
      02-24-2013, 01:43 PM   #537
lbjgh
Lieutenant Colonel
lbjgh's Avatar
Canada
104
Rep
1,511
Posts

Drives: 2013 AW X3 M-Sport
Join Date: Dec 2011
Location: North of Toronto

iTrader: (0)

I looked last night and didn't see any adjustment in the menu. It may been in the dolby 5.1 sound with another disc. Sorry I'm not much help today.
Quote:
Originally Posted by thecam View Post
Ok tanks lbjgh let me know if you remember it....
__________________
2013, AW, xDrive35i, M Sport Package, Technology Package, Dynamic Comfort Package, Premium Package, 3M Clear Bra, Euro foglight switch, a few coded fixes
Appreciate 0
      02-25-2013, 07:37 AM   #538
thecam
Enlisted Member
Italy
6
Rep
38
Posts

Drives: X3 M-sport
Join Date: Dec 2011
Location: Italy

iTrader: (0)

Yes problem is dolby but every dvd has got dolby and every dvd has got low audio.....
Appreciate 0
      03-03-2013, 04:19 PM   #539
noka
First Lieutenant
United_States
9
Rep
321
Posts

Drives: 2013 x35i M-Sport
Join Date: Dec 2012
Location: MA

iTrader: (0)

Installed E-sys s/w (3.18.4) and psdzdata files (48.3) (thanks shawnsheridan !) on WinXP/SP3 laptop. Ignition on, cable connected (thanks April1 !) and I waited until NIC acquired 169.254.xxx.xxx (APIPA) address. ZGW_SEARCH.exe throws pop-up error with banner UDP_Peer and text /!\ Run-time error '126':. After several attempts with same result, I launched E-Sys, waited until it wrote log file, clicked connect button, selected target vehicle 'F25...' and was able to connect and could see that it showed the VIN (so there must be communication). I didn't go any further, since I just wanted to check the cable/connection. Curious why ZGW_SEARCH.exe will not run and if it indicates a problem that might show later during actual coding.

Note: I did not use automated setup but instead installed manually according to: E-Sys - Installation Instructions - v.2.txt
Did I need to do something to EDIABAS.ini file, or something else?

UPDATE: Reload of OS and manual install of E-sys solved run-time error.
__________________
2013 x35i (Space Gray, MSport, CW/CWII, DHP, Premium, Premium Sound, Technology, BMW-Apps)
Retired: '09 C300 4Matic, '09 GTI, '06 750i, '05 C55, '04 R32, '03 M5, '02 GTI, '01 M5, '00 M-Coupe, '00 540i/6, '99 M3 Coupe, '98 M3 Coupe, '96 328i,... '86 4000 CS Quattro... too many to list.

Last edited by noka; 03-07-2013 at 08:15 PM..
Appreciate 0
      03-08-2013, 04:54 PM   #540
buze
Owner
United Kingdom
131
Rep
566
Posts

Drives: G05 30d M-Sport
Join Date: Dec 2012
Location: Berkshire, Powys

iTrader: (0)

Garage List
does the 510 resistor specified in the cable diagram needs to be /exact/ ? I do a lot of electronics, and I can find 480 easily in my parts boxes, but no sign if 510 (or 560 even wich is more bizarre)

What about the 1/4w rating? I was thinking of adding a 480 0805 between the pins....
__________________
Received 190911: X5 30d M-Sport:Artic Grey:Comfort Pack:Tech Pack:Visibility Pack: Driver Assist Pro Pack:Heat Pack:Glass Roof:Leather Dash
Appreciate 0
      03-08-2013, 05:04 PM   #541
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

If you are making just one cable, you can use combination of two series resistors like 330 + 180 or whatever combination you have. Value within 5% should be good enough. You need at least 0.5 W for reliable operations.

As I build cables regularly, I have a ready stock of 510 R
Appreciate 0
      03-09-2013, 06:59 AM   #542
Andyh747
Enlisted Member
1
Rep
43
Posts

Drives: BMW X3
Join Date: Nov 2012
Location: Gloucester UK

iTrader: (0)

Just tried to install software as described in the first post. I'm getting the following error:

File EDIABAS.INI does not exist. Please Check

I have the correct files in the BMWInstall folder. What am I doing wrong? I'm running Windows 7 Ultimate.
Appreciate 0
      03-09-2013, 08:42 AM   #543
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

You have to add EDIABAS. Ini and property file as shown in the diagram. Download these files and remove the PDF at the end.
Appreciate 0
      03-09-2013, 08:52 AM   #544
Andyh747
Enlisted Member
1
Rep
43
Posts

Drives: BMW X3
Join Date: Nov 2012
Location: Gloucester UK

iTrader: (0)

I have done that and I've checked my folder structure against your screenshot and they match. I got round the first error message by running as Administrator. However now it says:

Folder E-Sys_3.18.4\E-sys does not exist. Please check...

What's causing this?
Appreciate 0
      03-09-2013, 08:54 AM   #545
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Your folder structure is not right. Look at the diagrams carefully. You got to organize ESys and psdz data correctly for batch file to work else go for manual installation procedure.
Appreciate 0
      03-09-2013, 08:58 AM   #546
Andyh747
Enlisted Member
1
Rep
43
Posts

Drives: BMW X3
Join Date: Nov 2012
Location: Gloucester UK

iTrader: (0)

Quote:
Originally Posted by April1 View Post
Your folder structure is not right. Look at the diagrams carefully. You got to organize ESys and psdz data correctly for batch file to work else go for manual installation procedure.
Ok have hopefully attached screenshot. Can you advise what's incorrect? Sorry for the hassle but really appreciate the help.
Attached Images
 
Appreciate 0
      03-09-2013, 09:49 AM   #547
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Your configuration seems to be correct. Will you download the setup file again and try.
Appreciate 0
      03-10-2013, 11:21 AM   #548
jdenmead
New Member
2
Rep
8
Posts

Drives: E91 M-Sport
Join Date: Nov 2009
Location: Bristol, UK

iTrader: (0)

Ive been coding a BMW X3 F25 and trying to get the TPMS to show pressure and temperature.
I have set HU_CIC 3001 EXBOX RDC_SAFETY aktiv / Werte=01
But the display only show the oC and bar text with no figures. I have read this may start working in time but after driving for 45 minutes today nothing changed.
Is there something else that needs to be done for this to work or is it just more time driving needed?
Thanks
James
Appreciate 0
      03-10-2013, 12:06 PM   #549
noka
First Lieutenant
United_States
9
Rep
321
Posts

Drives: 2013 x35i M-Sport
Join Date: Dec 2012
Location: MA

iTrader: (0)

See this thread (and post from shawnsheridan) and check if you have the correct option:
http://bimmerfest.com/forums/showthread.php?t=680785
__________________
2013 x35i (Space Gray, MSport, CW/CWII, DHP, Premium, Premium Sound, Technology, BMW-Apps)
Retired: '09 C300 4Matic, '09 GTI, '06 750i, '05 C55, '04 R32, '03 M5, '02 GTI, '01 M5, '00 M-Coupe, '00 540i/6, '99 M3 Coupe, '98 M3 Coupe, '96 328i,... '86 4000 CS Quattro... too many to list.
Appreciate 0
      03-10-2013, 01:22 PM   #550
jdenmead
New Member
2
Rep
8
Posts

Drives: E91 M-Sport
Join Date: Nov 2009
Location: Bristol, UK

iTrader: (0)

Quote:
Originally Posted by noka View Post
See this thread (and post from shawnsheridan) and check if you have the correct option:
http://bimmerfest.com/forums/showthread.php?t=680785
Thanks Noka,
Checked that link and looks like I don't have the RDC type of TPMS fitted in mine. bmwvin didnt show it listed anyway.
I'll leave it enabled and see if it decides to start working, if not turn it off and wish I had it
Thanks for the tip.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:46 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST