[apanner]

X3-2013 F25 -i28 x drive
Drive Train malfunction error

When driving on steep mountains at a speed of 90 km/h in cruise mode, I encountered a "Drive Train malfunction" error on two occasions. Strangely, the error does not occur when driving below 80 km/h. However, once I stop the vehicle, the error code clears automatically, and the vehicle status indicates that everything is okay.


why this error ?

I checked battery status in bimmerlink app... battery life is zero

seems its time to change the battery...

i got few undervoltage error codes..

10 Central gateway module
3 errors
CD043F: NAK receiver node: did not pick up the message; buffer full
801C15: Failed to fall asleep at 30B
801C20: Central fault memory full


29 Dynamic stability control MK60 E5
1 error
4809AB: Global power supply - external undervoltage

36 Japan basis interface telephone
1 error
B7F180: Software reset

56 Roof function centre
2 errors
801A4C: SINE: Internal supply undervoltage
801A4A: Deactivation of IRS and inclination sensor via customer function

63 Headunit/radio
2 errors
E1C43F: Receiver node: did not pick up message; Buffer full
E1C447: MOST node: all function blocks logged of


72 Driver's side footwell module
3 errors
800F7A: Rear running light left defective
800F7B: Reversing light on the right is defective
800F92: Welcome Light repeat lock active

how to clear all the codes ?

Thanks