[spelk3]

Hi,

Does anyone know how to implement the Sport+ mode using the DEC switch with BimmerCode? It’s not a precoded function for the X3. I’ve only got eco-pro, comfort and sport.

[n55david]

Originally Posted by spelk3

Hi,

Does anyone know how to implement the Sport+ mode using the DEC switch with BimmerCode? It’s not a precoded function for the X3. I’ve only got eco-pro, comfort and sport.

isn't just under the trans ecu section?

[spelk3]

Originally Posted by Phantom10R

isn't just under the trans ecu section?

No. Only have sport automatic transmission. Sport+ isn’t listed anywhere.

I’ve actually emailed BimmerCode and they said it can’t be done. I thought I’d see if anyone had figured it out.

www.bimmer-tech.net sells code to do it but I don’t want to pay $150 just to code Sport+. ($99 plus $49 for adapter).

[n55david]

Originally Posted by spelk3

No. Only have sport automatic transmission. Sport+ isn't listed anywhere.

I've actually emailed BimmerCode and they said it can't be done. I thought I'd see if anyone had figured it out.

www.bimmer-tech.net sells code to do it but I don't want to pay $150 just to code Sport+. ($99 plus $49 for adapter).

I was gonna day xhp will do it but if you don't wanna spend any money, then I dunno.

there is a coding thread here already, it will be in there.

[spelk3]

Originally Posted by Phantom10R

I was gonna day xhp will do it but if you don't wanna spend any money, then I dunno.

there is a coding thread here already, it will be in there.

I already have xHP, MHD, BimmerCode and BimmerLink. Just can’t see spending that much for a single coding update.

[pungo]

Did you VO code 205 to 2TB, then code KOMBI/ICM/EGS ?

[spelk3]

Originally Posted by pungo

Did you VO code 205 to 2TB, then code KOMBI/ICM/EGS ?

No. I’m assuming this is done with the expert mode in BimmerCode? Are there easy to find instructions anywhere?

I do have Sport Automatic Transmission set to active using BimmerCode.

BimmerCode told me it was not possible to add Sport+ even coding using expert mode.

[pungo]

Originally Posted by spelk3

No. I’m assuming this is done with the expert mode in BimmerCode? Are there easy to find instructions anywhere?

BimmerCode told me it was not possible even coding using expert mode.

Sorry, wasn't aware of it's limitations, I don't use bimmercode for coding. Use e-sys instead

[spelk3]

Originally Posted by pungo

Sorry, wasn't aware of it's limitations, I don't use bimmercode for coding. Use e-sys instead

How do I get e-sys? How does it connect? I’ve got both WiFi and Bluetooth OBD2 adapters.

[spelk3]

Originally Posted by pungo

Sorry, wasn't aware of it's limitations, I don't use bimmercode for coding. Use e-sys instead

I’ve got e-sys and an ENET cable ordered.

You wouldn’t happen to have instructions on how to enable Sport+ mode, would you?

Thanks,
Steve

[pungo]

Originally Posted by spelk3

I’ve got e-sys and an ENET cable ordered.

You wouldn’t happen to have instructions on how to enable Sport+ mode, would you?

Thanks,
Steve

Here's the guide: E-Sys User Guide.pdf
Change VO from 205 to 2TB
Then code KOMBI/ICM/EGS

[spelk3]

Originally Posted by pungo

Here's the guide: Attachment 2647378
Change VO from 205 to 2TB
Then code KOMBI/ICM/EGS

Thank you, much appreciated!

[spelk3]

Originally Posted by pungo

Here's the guide: Attachment 2647378
Change VO from 205 to 2TB
Then code KOMBI/ICM/EGS

One more question, what coding value changes do I need to make to KOMBI, ICM and EGS?

Thanks!

[spelk3]

Got Sport+ working.

Coding with esys messed up some of the other coding I had done with BimmerCode. So I had to recode them. Also set off brake ABS warning after coding but that seems to have gone away.

BimmerCode is much easier to use than esys but can’t do as much.

[pungo]

Originally Posted by spelk3

Got Sport+ working.

Coding with esys messed up some of the other coding I had done with BimmerCode. So I had to recode them. Also set off brake ABS warning after coding but that seems to have gone away.

BimmerCode is much easier to use than esys but can’t do as much.

Good you got it working
Anytime you change the VO and code the applicable modules, you loose any custom coding for those modules since it writes the defaults to them. Now if you make a backup of the \data\CAF\CAFD*.ncd files you'll be able to able to restore any coding you have done.

If you load the "FDL Cheat Codes" in launcher, you get a bunch of custom coding options to select from.