[SchonE91]

The immobilizer is activated on the X3 (key fobs don’t work, car won’t start). This occurred after replacing the ignition switch. In hind sight, I did not disconnect the battery during the switch replacement, which probably set off the the immobilizer.

Any information on how to reset the immobilizer is appreciated. I currently only have a scanner (Ancel BM700); I’m several weeks away from getting set up with diagnostic/coding tools (INPA/ISTA/Tools) if that’s required, but hope there’s a simpler way to reset the immobilizer.

TIA, Ken

Follow up: Used INPA to reset the EWS module. If you’re a DIYer, INPA is well worth having in the toolkit.