[amit_ismd]

Can anyone please help me code my 2017 BMW X3 x35i in Midland, Texas? I need just a few things coded:
1.) Unlock doors when engine is stopped. Allows single pull to open doors.
2.) Close mirrors + windows + moon roof through key FOB.
3.) Close mirrors + windows + moon roof through Comfort Access.
4.) Close Trunk/ Tailgate through button on FOB

Anybody in Midland, Texas please help.

Thanks a lot

[mmaigret]

I recently had my X3 in for service, and despite me specifically asking the dealer to not reprogram the ECU, they did anyway (grrr). Now I've lost all my coding and the I-Step has been updated to F025-16-07-501, similar to Paul J below (more grrrr).

I have patched/PIN'd copy of ESys (3.23?) that I've had for a while; I also obtained a later copy psdzdata (59.2?) that I think should be compatible with the new I-Step. However, it does not appear that I am currently able to use VO coding for some reason (unable to activate FA), but even if I could, it seems my options for coding are incredibly limited (even more grrrr).

I see Shawn Sheridan appears to be the man with the plan here; curious if I could trouble him for some advice on what options I have at this point TIA.

Originally Posted by PaulJ

I recently got the OEM trailer hitch installed at the dealership, and they also updated the software to accommodate for the hitch. I'm now having trouble coding the car, I can't read some of the coding data. I get error messages such as "File for "cafd_000007c8-007_001_022" not found! [C012]".
I noticed the car's I-Step changed from "F025-15-11-503" to "F025-16-07-501". I'm using PSdZData v.58.3. Do I need a new version?
Any ideas of what I might be doing wrong?

Thanks for your help,
Paul

[shawnsheridan]

Originally Posted by mmaigret

I recently had my X3 in for service, and despite me specifically asking the dealer to not reprogram the ECU, they did anyway (grrr). Now I've lost all my coding and the I-Step has been updated to F025-16-07-501, similar to Paul J below (more grrrr).

I have patched/PIN'd copy of ESys (3.23?) that I've had for a while; I also obtained a later copy psdzdata (59.2?) that I think should be compatible with the new I-Step. However, it does not appear that I am currently able to use VO coding for some reason (unable to activate FA), but even if I could, it seems my options for coding are incredibly limited (even more grrrr).

I see Shawn Sheridan appears to be the man with the plan here; curious if I could trouble him for some advice on what options I have at this point TIA.

You need to update to 59.2 PSdZData, which necessitates also updating to E-Sys 3.27.1, and of course latest E-Sys Launcher. PM sent.

[kucha12]

Hello,

My car (X3 2014) was recently updated to newest I-Step as well. Tried to code but experienced the same that other users described above. I guess I need new E-Sys and rest. Can I get those please?

Thanks a lot.

[shawnsheridan]

Originally Posted by kucha12

Hello,

My car (X3 2014) was recently updated to newest I-Step as well. Tried to code but experienced the same that other users described above. I guess I need new E-Sys and rest. Can I get those please?

Thanks a lot.

PM sent.

[kucha12]

Originally Posted by shawnsheridan

PM sent.

Thanks for quick response and for the files

[orion7144]

I would like to get the software please.

[shawnsheridan]

Originally Posted by orion7144

I would like to get the software please.

PM sent.

[TonyX3driver]

Originally Posted by shawnsheridan

You need to update to 59.2 PSdZData, which necessitates also updating to E-Sys 3.27.1, and of course latest E-Sys Launcher. PM sent.

Hi Shawn, back after several months here...
I'm exactly the same situation, car serviced 2 weeks ago. Told them not update SW... This must be malice...

actually running E-Sys 3.24.3 and cannot edit ASCM and CAS CAFD's

My actual I-step is F025-16-07-502

can you send me actual SW?

Thank you

tahks you very much

[shawnsheridan]

Originally Posted by TonyX3driver

Hi Shawn, back after several months here...
I'm exactly the same situation, car serviced 2 weeks ago. Told them not update SW... This must be malice...

actually running E-Sys 3.24.3 and cannot edit ASCM and CAS CAFD's

My actual I-step is F025-16-07-502

can you send me actual SW?

Thank you

tahks you very much

PM sent.

[TonyX3driver]

Originally Posted by shawnsheridan

PM sent.

Thank you, working on...

[FSociety]

Does anyone have a Cheat Sheet for the F25/F26 codings ?
How many coding features is it shared with other models like F15/F16 or maybe F10 ?

[TonyX3driver]

Originally Posted by TonyX3driver

Thank you, working on...

All is ok now, I'm back with my functions
Thank you Shawn, you saved me again!

Regards from Brno, Czech

[shawnsheridan]

Originally Posted by TonyX3driver

All is ok now, I'm back with my functions
Thank you Shawn, you saved me again!

Regards from Brno, Czech

[Bobmatt]

Assuming I have the fsc for speed limit information for my F25, how do I then code it? I have seen examples for other modules, but I can't seem to translate that into successfully activating this. I have KAFAS2, lane departure, rain sensor.

[shawnsheridan]

Originally Posted by Bobmatt

Assuming I have the fsc for speed limit information for my F25, how do I then code it? I have seen examples for other modules, but I can't seem to translate that into successfully activating this. I have KAFAS2, lane departure, rain sensor.

Add 8TH to FA and the VO Code KAFAS2, Kombi, and Head Unit.

[Kugaman1]

Hi Shawnsheridan.....

Any possibility of a link to all of the software I need to start coding my 2016 f25?
Ive got the cable, just looking for the software!

Many thanks in advance.

[shawnsheridan]

Originally Posted by Kugaman1

Hi Shawnsheridan.....

Any possibility of a link to all of the software I need to start coding my 2016 f25?
Ive got the cable, just looking for the software!

Many thanks in advance.

PM sent.

[Hoppy_70]

Shawn, I got a new f30 yesterday with idrive 5.0, I got in with e-sys and it reads the vehicle order but gives lots of "file not found" for the CAFD files? Is there a newer version of e-sys that will work with this car? Cheers

[shawnsheridan]

Originally Posted by Hoppy_70

Shawn, I got a new f30 yesterday with idrive 5.0, I got in with e-sys and it reads the vehicle order but gives lots of "file not found" for the CAFD files? Is there a newer version of e-sys that will work with this car? Cheers

PM sent.

[Bobmatt]

Originally Posted by shawnsheridan

Add 8TH to FA and the VO Code KAFAS2, Kombi, and Head Unit.

Thanks! Worked perfectly!

[Kugaman1]

Originally Posted by shawnsheridan

PM sent.

Shawnsheridan you are a gentleman, thank you.