BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      03-12-2015, 02:28 PM   #1387
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by TonyX3driver View Post
Good. Now, time to close garage and go for some good wine
It was very exciting time with clocks off.
Thank you once again for your support, very appreciate this. Wish to have some drink together, I'm due to you!
Best regards, Tony
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 10:14 AM   #1388
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
You can try, but for any ECU that has Trimmed CAFD you will not be able to find any FDL Codes.

No new E-Sys will solve this. The issue is all descriptive text has been removed from most of the PSdZData files.
Hi Shawn,

Initiated this today and so far just made FA and CAFD backup of original configuration files as per April1's tutorial.

However, when reading CAFD files, after "read coding data" in "coding" box, the error report reports 7 errors - please see attached report.
Is this a problem? Tried 3 or 4 times with same result.

Before continuing the process, 2 questions:

- did I do correctly disconnecting E-Sys after reading coding data? Should have done anything else before disconnect? Or is it safe to disconnect anytime anywhere?

- during the process I'm always afraid the car goes off, because I noticed already that after a while it goes off when listening to the radio. If it happens during E-Sys connection, independently of what I could be doing, can it damage or brick something?

Being too cautious because don't want to brick anything.

Tks in advance for your continued support.

Last edited by RolaNoCalhau; 03-19-2015 at 09:31 AM..
Appreciate 0
      03-14-2015, 11:38 AM   #1389
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Hi Shawn,

Initiated this today and so far just made FA and CAFD backup of original configuration files as per April1's tutorial.

However, when reading CAFD files, after "read coding data" in "coding" box, the error report reports 7 errors - please see attached report.
Is this a problem? Tried 3 or 4 times with same result.

Before continuing the process, 2 questions:

- did I do correctly disconnecting E-Sys after reading coding data? Should have done anything else before disconnect? Or is it safe to disconnect anytime anywhere?

- during the process I'm always afraid the car goes off, because I noticed already that after a while it goes off when listening to the radio. If it happens during E-Sys connection, independently of what I could be doing, can it damage or brick something?

Being too cautious because don't want to brick anything.

Tks in advance for your continued support.
You can disconnect E-Sys anytime so long as you are not in the middle of writing data to ECU.

You should not be worrying about the car going off as the motor should be running during coding.

What PSdZData version are you using?
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 01:19 PM   #1390
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
You can disconnect E-Sys anytime so long as you are not in the middle of writing data to ECU.

You should not be worrying about the car going off as the motor should be running during coding.

What PSdZData version are you using?
PSdZData version 54.1
Appreciate 0
      03-14-2015, 01:26 PM   #1391
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
PSdZData version 54.1
What is the Connection Target Name? It contains the I-Step (PSdZData) version.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 03:13 PM   #1392
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
What is the Connection Target Name? It contains the I-Step (PSdZData) version.
How and where do I reach that?

Well, I have made some progress however.

In spite having the software version F010-15-03-501 = ISTA/P 2.55.0., it seems I was able find the FDL codes after all. Hope this be good news.

I was able to code already button on key fob to close trunk, and tried few others with no success. But I could find them.

Tried to remove the seatbelt warning but didn't find the 3001 section in ACSM module... how is it possible?

Another one I could use your help is to disable DVD speedlock. Please take a look at the attached print screen: as you can see I have no option to put value = FF as stated in the cheat chart. Can you help on this one?

Tried also the digital speed in BC (don't know what this means) and when finished coding an analogue speedometer showed up in the display below speed instrument but after 50 or 60 seconds disappeared. It reset the clock and nothing else. Do you have any suggestion?

Last edited by RolaNoCalhau; 03-18-2015 at 12:26 PM..
Appreciate 0
      03-14-2015, 03:19 PM   #1393
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
How and where do I reach that?

Well, I have made some progress however.

In spite having the software version F010-15-03-501 = ISTA/P 2.55.0., it seems I was able find the FDL codes after all. Hope this be good news.

I was able to code already button on key fob to close trunk, and tried few others with no success. But I could find them.

Tried to remove the seatbelt warning but didn't find the 3001 section in ACSM module... how is it possible?

Another one I could use your help is to disable DVD speedlock. Please take a look at the attached print screen: as you can see I have no option to put value = FF as stated in the cheat chart. Can you help on this one?

Tried also the digital speed in BC (don't know what this means) and when finished coding an analogue speedometer showed up in the display below speed instrument but after 50 or 60 seconds disappeared. It reset the clock and nothing else. Do you have any suggestion?
When you hit the Connect Button, you were presented a window with a list of Targets, and you selected one. This target had a name, something like F025-14-11-502.

FF is not available from the Dropdown list of predefined settings. You need to change the Werte Value directly:

E-Sys - How to Change Werte Values.pdf:

http://f30.bimmerpost.com/forums/att...3&d=1338274757

Digital speed appears in the BC Cluster, and you must cycle through the settings with the BC Stalk to display it.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 05:04 PM   #1394
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
You can disconnect E-Sys anytime so long as you are not in the middle of writing data to ECU.

You should not be worrying about the car going off as the motor should be running during coding.

What PSdZData version are you using?
All the few coding I did was with the engine not running. Is it mandatory?
Appreciate 0
      03-14-2015, 05:11 PM   #1395
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
All the few coding I did was with the engine not running. Is it mandatory?
No, not mandatory, but when the voltage drops too low, and you corrupt ECU CAFD file, you will just wish then you ran the motor per the instructions.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 05:14 PM   #1396
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
When you hit the Connect Button, you were presented a window with a list of Targets, and you selected one. This target had a name, something like F025-14-11-502.

FF is not available from the Dropdown list of predefined settings. You need to change the Werte Value directly:

E-Sys - How to Change Werte Values.pdf:

http://f30.bimmerpost.com/forums/att...3&d=1338274757

Digital speed appears in the BC Cluster, and you must cycle through the settings with the BC Stalk to display it.
Tks Shawn, I'll try that again and give you the info later.

In the meanwhile, can you advise on how to remove the seatbelt warning?
I couldn't find the 3001 section in ACSM module...
Appreciate 0
      03-14-2015, 05:18 PM   #1397
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Tks Shawn, I'll try that again and give you the info later.

In the meanwhile, can you advise on how to remove the seatbelt warning?
I couldn't find the 3001 section in ACSM module...
Do not restrict your search to just a section like 3001. These vary by CAFD version. Use the search bar at the top, and search for FDL Codes by name. Understand though that the search bar searches only from the Top => Down, so make sure you start at the top of the CAFD, and do not have any leading or trailing spaces in your search term.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 05:46 PM   #1398
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
FF is not available from the Dropdown list of predefined settings. You need to change the Werte Value directly:
Shawn, regarding this issue I read and understood how to change werte value. Tks
However, still don't know which option to choose under Ausgelesen (1st parameter), because it only has "nicht_aktiv", "8_kmh" and "3_kmh" whereas the cheat chart only refers "value = FF" in the "new value" column.
Appreciate 0
      03-14-2015, 05:48 PM   #1399
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Shawn, regarding this issue I read and understood how to change werte value. Tks
However, still don't know which option to choose under Ausgelesen (1st parameter), because it only has "nicht_aktiv", "8_kmh" and "3_kmh" whereas the cheat chart only refers "value = FF" in the "new value" column.
You change only the Werte Value. Leave the Drop-down alone. It will change to Unknown after you write custom Werte Value to ECU.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-14-2015, 05:53 PM   #1400
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
You change only the Werte Value. Leave the Drop-down alone. It will change to Unknown after you write custom Werte Value to ECU.
Great! Tks. I'll post results.
Appreciate 0
      03-15-2015, 03:53 PM   #1401
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Hi again Shawn!

Quote:
Originally Posted by shawnsheridan View Post
What is the Connection Target Name? It contains the I-Step (PSdZData) version.
Quote:
Originally Posted by shawnsheridan View Post
When you hit the Connect Button, you were presented a window with a list of Targets, and you selected one. This target had a name, something like F025-14-11-502.
Please see the attached print screen.

Quote:
Originally Posted by shawnsheridan View Post
Digital speed appears in the BC Cluster, and you must cycle through the settings with the BC Stalk to display it.
It worked and I found it, tks.

Quote:
Originally Posted by shawnsheridan View Post
Do not restrict your search to just a section like 3001. These vary by CAFD version. Use the search bar at the top, and search for FDL Codes by name. Understand though that the search bar searches only from the Top => Down, so make sure you start at the top of the CAFD, and do not have any leading or trailing spaces in your search term.
This one didn't work. I searched thoroughly the entire CAFD and it isn't there.
However I found strange that inside the ACSM module there are 3 CFD files with green check marks. But when I "read coding data" only one file turns into a folder, the other 2 have errors.

Report:
ACSM [1] [DY00991]
readCPS o.k.
CAFD_00000909_004_003_007 Fehler:
File for "cafd_00000909-004_003_007" not found! [C012]

ACSM [1] [DY00991]
readCPS o.k.
CAFD_0000090A_004_003_049 Fehler:
File for "cafd_0000090a-004_003_049" not found! [C012]

ACSM [1] [DY00991]
readCPS o.k.
CAFD_0000090B_004_004_012.ncd generated

Is it possible that the wanted function (remove the seatbelt warning) could be inside of either one of those 2?

Last edited by RolaNoCalhau; 03-18-2015 at 12:27 PM..
Appreciate 0
      03-15-2015, 05:38 PM   #1402
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Is it possible to change CAFD values offline and then connect and start in the step 19? If so, do I still need to read (VCM) in SVT Actual?
Appreciate 0
      03-15-2015, 06:59 PM   #1403
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Hi again Shawn!

Please see the attached print screen.

It worked and I found it, tks.

This one didn't work. I searched thoroughly the entire CAFD and it isn't there.
However I found strange that inside the ACSM module there are 3 CFD files with green check marks. But when I "read coding data" only one file turns into a folder, the other 2 have errors.

Report:
ACSM [1] [DY00991]
readCPS o.k.
CAFD_00000909_004_003_007 Fehler:
File for "cafd_00000909-004_003_007" not found! [C012]

ACSM [1] [DY00991]
readCPS o.k.
CAFD_0000090A_004_003_049 Fehler:
File for "cafd_0000090a-004_003_049" not found! [C012]

ACSM [1] [DY00991]
readCPS o.k.
CAFD_0000090B_004_004_012.ncd generated

Is it possible that the wanted function (remove the seatbelt warning) could
be inside of either one of those 2?
It is in the 1st (Top) CAFD, so that explains that.

Download and copy to your CAFD library folder (C:\Data\psdzdata\swe\cafd):

cafd_00000909.caf.004_003_007:

https://mega.co.nz/#!A5pwURyZ!K65IVQ...wEOx1z4xPot_j0

Quote:
Originally Posted by RolaNoCalhau View Post
Is it possible to change CAFD values offline and then connect and start in the step 19? If so, do I still need to read (VCM) in SVT Actual?
Yes. You can read ECU, disconnect from car, make changes offline, connect back to car, and write changes to car via Code FDL. You will need to Activate FA and read SVT again.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-16-2015, 05:57 AM   #1404
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
It is in the 1st (Top) CAFD, so that explains that.

Download and copy to your CAFD library folder (C:\Data\psdzdata\swe\cafd):

cafd_00000909.caf.004_003_007:

https://mega.co.nz/#!A5pwURyZ!K65IVQ...wEOx1z4xPot_j0


Yes. You can read ECU, disconnect from car, make changes offline, connect back to car, and write changes to car via Code FDL. You will need to Activate FA and read SVT again.
Tks Shawn, download it already and will give it a try.

Another question: so that file I just downloaded was missing from psdzdata archive. Since I have 6 other CFD files with green check marks that don't turn into a folder, I might be missing those as well.
Can you check error report attached and if so send those files?

For example the CAS module has 1 with green check mark and it won't generate .ncd as well.

Tks
Attached Files
File Type: txt report 7 errors read coding data.txt (2.2 KB, 133 views)
Appreciate 0
      03-16-2015, 11:12 AM   #1405
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Tks Shawn, download it already and will give it a try.

Another question: so that file I just downloaded was missing from psdzdata archive. Since I have 6 other CFD files with green check marks that don't turn into a folder, I might be missing those as well.
Can you check error report attached and if so send those files?

For example the CAS module has 1 with green check mark and it won't generate .ncd as well.

Tks
Best I can tell it is as follows:

File for "cafd_00000909-004_003_007" not found! [C012] Provided Above
File for "cafd_0000090a-004_003_049" not found! [C012] Not Needed - Nothing to code in this CAFD

These were added new in 55.0, and there is no working version of these CAFD files:

File for "cafd_0000000f-005_025_044" not found! [C012]
File for "cafd_00000c18-014_082_005" not found! [C012]
File for "cafd_0000029b-000_009_006" not found! [C012]
File for "cafd_00000014-004_100_001" not found! [C012]
File for "cafd_00000018-004_010_006" not found! [C012]
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-16-2015, 11:35 AM   #1406
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Best I can tell it is as follows:

File for "cafd_00000909-004_003_007" not found! [C012] Provided Above
File for "cafd_0000090a-004_003_049" not found! [C012] Not Needed - Nothing to code in this CAFD

These were added new in 55.0, and there is no working version of these CAFD files:

File for "cafd_0000000f-005_025_044" not found! [C012]
File for "cafd_00000c18-014_082_005" not found! [C012]
File for "cafd_0000029b-000_009_006" not found! [C012]
File for "cafd_00000014-004_100_001" not found! [C012]
File for "cafd_00000018-004_010_006" not found! [C012]
Tks Shawn!

But, in that case, why am I not being able to access CAS module?
There is plenty to code therein...
Appreciate 0
      03-16-2015, 11:52 AM   #1407
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Tks Shawn!

But, in that case, why am I not being able to access CAS module?
There is plenty to code therein...
I wrote you above why.

cafd_0000000f-005_025_044 was added new in 55.0, and there is no working version of these CAFD files.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      03-16-2015, 03:45 PM   #1408
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
I wrote you above why.

cafd_0000000f-005_025_044 was added new in 55.0, and there is no working version of these CAFD files.
Ok! Sorry for being insistent but I still have some difficulties in understanding all this.

But thank you very much, I wouldn't have been successful without your help. Tks for being there!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:42 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST