[Marcus_01]

So here is what I have coded using (E-sys) so far on my 2015 X4 35i M Sport:

1. FOB lock button can close sunroof/rear hatch/mirrors fold in
2. Enable HUD turn signal
3. Easy access driver seat. It moves back when car is in park and when you press start it moves up into position last saved
4. Automatic high beam assist.
5. Added “hitch” view in case I was towing and trying to line up with the hitch
6. All cameras can be active at any speed.
7. DVD can play while vehicle is in motion.
8. Changed start up iDrive screen to show M logo
9. Disable seat belt reminder.
10. Enable HUD entertainment and telephone display.
11. Opening doors will not stop windows up.
12. Press engine off and all doors open
13. Open driver’s door shuts down radio and dash
14. Pressure and temperature on TPMS screen. Note: THIS IS THE ONLY ONE THAT DID NOT WORK. I believe it is the type of sensor.

Anyone code any other options I have not mentioned.

M

[Sarsippius3rd]

Very nice. What is hitch view? And what do you see when you enable HUD entertainment and telephone view? I can see that optoin when I scroll the wheel?

I want to learn to code...

[Marcus_01]

Find in HU_MACRO_TRAILER_ZOOM

M

[nyalpine90]

I have temp display on tires


does M performance display come up every time you turn on the car?

[djrobx]

Is HUD turn signal and auto high beams working?

HUD turn signal didn't seem to do anything. We haven't tried auto high beams. My buddy who codes was under the impression it didn't work on 2015+ but i found someone else who said it was working on their X3 so I wanted to try it.

My TPMS pressure/temperature readings DO work on my 2016. I think its a US/Canada thing. From what I read on another thread, due to regulatory differences they just use lost rotational speed to identify a flat in canada instead of TPMS sensors. That's a benefit if you change to winter tires as you don't need to worry about moving sensors or re-programming.

The M logo on startup replaces the BMW connected drive animation. It's much nicer looking in my opinion. I don't feel it's "cheating" since I have an M-sport with M logos all over the place anyway.

12. Press engine off and all doors open
13. Open driver’s door shuts down radio and dash

I don't know why these two aren't default. So much better.

I also have disabled all the nag/warning screens. You may not even have had them in the first place in Canada, but they're brutal in the US.

[Marcus_01]

LOL its not cheating djrobx. As you said M logos every where; on wheels, door sill and steering wheel. It is a better start up screen by far.

Try this for turnsignal, it really is tiny when displayed in HUD but why not:

HU_NBT 3000 HUD_TURNSIGNAL set to aktiv
KOMBI 3000 BLINKER_HUD_ENABLE set to aktiv
KOMBI 3008 HUD_PIA_BLINKER set to aktiv

Try this for M Logo at start up, this is really cool looking:

HU_NBT 3001 STARTUP_EMBLEM set variant 1

For memory seat easy access on drivers side (this moves seat back when car is off and back to set position when started):

IHK 3000 IHK_CODIERDATEN OFF_MEMORY set aktiv

The automatic high beams work for me. What modules did you code. There are 4 to code.

Should mention if you don't have HU_NBT look in HU_CIC

[Marcus_01]

Originally Posted by Sarsippius3rd

Very nice. What is hitch view? And what do you see when you enable HUD entertainment and telephone view? I can see that optoin when I scroll the wheel?

I want to learn to code...

You see radio stations and phone list but not all contacts, I only have most recently show up. Ill get a pic tomorrow. It is just by using the scroll button.

I am addicted. So much to learn. These vehicle have so much that the dealers probably don't know about. Jut always write down what module you were in when changing settings so you have a reference if it does not work.

M

[Marcus_01]

Originally Posted by Sarsippius3rd

Very nice. What is hitch view? And what do you see when you enable HUD entertainment and telephone view? I can see that optoin when I scroll the wheel?

I want to learn to code...

Here are the turn signal and entertainment in HUD




B

[nyalpine90]

has anyone been able to disable the cornering lights off, only to work as turning signals.

M logo on startup doesn't display when I turn the car on. I have it because I press in the radio knob for 30 sec and it comes up.

[FloridaX4]

Where did you get the coding software from? I have a 2016 X4 35i M.

[Scandic24]

Originally Posted by FloridaX4

Where did you get the coding software from? I have a 2016 X4 35i M.

http://x3.xbimmers.com/forums/showth...ghlight=coding

[djrobx]

Originally Posted by nyalpine90

M logo on startup doesn't display when I turn the car on. I have it because I press in the radio knob for 30 sec and it comes up.

It doesn't come up every time, but for me it comes up reasonably often (when the car has been parked for a while).

What modules did you code. There are 4 to code

What 4 items did you code for auto high beams? I will try re-doing HUD turn signal stuff, we only did HUD_TURNSIGNAL, we probably missed the Kombi ones. Thanks!

Mine is HU_NBT also.

[Yocal]

Anyone know whether 8TH Speed Limit Info can be enabled through coding or does it not exist on the vehicle if the package wasn't purchased?

I didn't purchase ZDB (Driver Assistance Plus), but I can see that I have a KAFAS camera, probably from one of the other packages I do have: ZDA (Driver Assistance Package), ZLP (Lighting Package) or ZTP (Technology Package).

[nyalpine90]

I was surprise to see it twice over the weekend. It would be nice if it came up every time you turned on the car after an hour.

Originally Posted by djrobx

It doesn't come up every time, but for me it comes up reasonably often (when the car has been parked for a while).


What 4 items did you code for auto high beams? I will try re-doing HUD turn signal stuff, we only did HUD_TURNSIGNAL, we probably missed the Kombi ones. Thanks!

Mine is HU_NBT also.

[Scandic24]

Originally Posted by Yocal

Anyone know whether 8TH Speed Limit Info can be enabled through coding or does it not exist on the vehicle if the package wasn't purchased?

I didn't purchase ZDB (Driver Assistance Plus), but I can see that I have a KAFAS camera, probably from one of the other packages I do have: ZDA (Driver Assistance Package), ZLP (Lighting Package) or ZTP (Technology Package).

Not answering your direct question but it seem to be a bit tricky. You'll need an IBAC code, whatever that is.
Some retrofit info here:
http://www.etk.cc/bmw/EN/search/sele...CE/65/65_2242/

[djrobx]

Finally got around to trying auto HBA and changing the default ACC car lengths from 4 to 1.

HU_NBT => HIGH_BEAM_ASSISTANT = aktiv
KAFAS2 => FLA_ON_OFF = aktiv
FRM => FLA_VERBAUT = aktiv
FRM => FLA_AUTO_AKTIV = automatisch

ICM 3000 C_Abstandsstufe_Init = Stufe_1

Happy to report success! I drove home and drove up a dark road. The brights came on. An opposing car came and they shut off. It seems to work quite nicely, they didn't come on unexpectedly when it they weren't needed. Cool!

[Marcus_01]

Nice work. I did not know about the ICM 3000 C_Abstandsstufe_Init = Stufe_1
Thanks for posting.

M

[Scandic24]

Originally Posted by Yocal

Anyone know whether 8TH Speed Limit Info can be enabled through coding or does it not exist on the vehicle if the package wasn't purchased?

Just had Speed Limit Info retrofitted. Had to take it to the dealer for re-programming. One interesting thing, speed limit can be selected to show in both HUD and instrument cluster simultaneously.

[FSociety]

Originally Posted by nyalpine90

has anyone been able to disable the cornering lights off, only to work as turning signals.

M logo on startup doesn't display when I turn the car on. I have it because I press in the radio knob for 30 sec and it comes up.

I have M Logo on start up everytime on navigation

i have corner (side amber delete) too

[Yocal]

Originally Posted by Scandic24

Just had Speed Limit Info retrofitted. Had to take it to the dealer for re-programming. One interesting thing, speed limit can be selected to show in both HUD and instrument cluster simultaneously.

Interesting. I went to a different dealer for my maintenance, and he said nothing can be changed in the vehicle. To change options, you have to get a new vehicle.

[Scandic24]

Originally Posted by Yocal

Interesting. I went to a different dealer for my maintenance, and he said nothing can be changed in the vehicle. To change options, you have to get a new vehicle.

Besides the KaFAS cam, it seem to be some kind of country limitation. Have a look here:
http://www.etk.cc/bmw/EN/search/sele...CE/65/65_2242/
Here's what it looks like

[m235hou]

Originally Posted by Marcus_01

LOL its not cheating djrobx. As you said M logos every where; on wheels, door sill and steering wheel. It is a better start up screen by far.

Try this for turnsignal, it really is tiny when displayed in HUD but why not:

HU_NBT 3000 HUD_TURNSIGNAL set to aktiv
KOMBI 3000 BLINKER_HUD_ENABLE set to aktiv
KOMBI 3008 HUD_PIA_BLINKER set to aktiv

Try this for M Logo at start up, this is really cool looking:

HU_NBT 3001 STARTUP_EMBLEM set variant 1

For memory seat easy access on drivers side (this moves seat back when car is off and back to set position when started):

IHK 3000 IHK_CODIERDATEN OFF_MEMORY set aktiv

The automatic high beams work for me. What modules did you code. There are 4 to code.

Should mention if you don't have HU_NBT look in HU_CIC

I have 2016 model and HUD turn signals work but not the easy access.