BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      11-07-2012, 09:30 AM   #265
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Quote:
Originally Posted by chx437 View Post
New with E-Sys and some beginners problems:
- when installed the software all went Ok
- ZGW_Search detects the ENET cable Ok and gets e.g. the VIN

But when starting the E-Sys it cannot connetc to the car:

"Detection of programming target failed. [C032]

MCDError Severity: 2051, Error Code: 53315, Description:
internal error, Vendor Code: 28, Vendor Description:
could not parse Db project [2130759747] - SYSTEM_ERROR"


I tried two laptops (both running Win7 x64) but the same error from both.
One additional detail: E-Sys never asked any PIN ...is this normal?

Anyone had similar experience ...any hint how to get forward?

Here's the error msg with all the detailed text:
It seems you have not installed the psdzdata files correctly.
Appreciate 0
      11-07-2012, 09:46 AM   #266
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Quote:
Originally Posted by pacecapt View Post
How do I load my vehicle coding (CAF/.ncd) files into E-Sys in order to edit or view them when not connected to my vehicle? I have gone through the E-Sys "Editors and Viewers" Tab documentation but it seems to have missed a step. I am able to copy and move the .ncd files but I can't seem to load them as it keeps asking me for an FA and that folder is empty. I have not been able to connect the dots between page 2 and 3 of that Tab.
To view your cafd files when not connected to car, you should save your SVT during the last connection to car. Following are the steps:

Connect to the car
As usual read FA and SVT
Now save FA and SVT to a location of your choice but outside E-Sys.
In the process save all the cafd files too
Disconnect ESys

You are now ready for off line reading.

Start ESys
Don't press connect button
Press load to load saved FA (this may be optional)
Press load to load SVT
Right click on any green cafd file marker and New>FDL
Point to the right saved cafd file

Now follow your steps
Appreciate 0
      11-07-2012, 10:57 AM   #267
chx437
Enlisted Member
10
Rep
33
Posts

Drives: BMW X3(G01)
Join Date: Jun 2011
Location: Finland

iTrader: (0)

Quote:
Originally Posted by April1 View Post
It seems you have not installed the psdzdata files correctly.
Thanks April!
Perhaps you can give some further quidance based on following info:

My psdzdata folder "c:\ESysSData\psdzdata" contains all files extracted by WinRAR from the original psdzdata 47.4 rar -packages (using all the 23 downloaded *.rar files). In the "psdzdata\mainseries" subfolder there are some additional folders & files generated during the installation.

The data files in psdzdata were just extracted by WinRAR and there was no any other processing before using them, is this ok ?

The "status" of the other subfoldres in the ESysData -folder is:
CAF - no files here
EST - two files here, e.g. Code Away.est
Etc - no files here
FA - on sample xml file here
FP - no files here
Logs - several log files
ODX - no files here
Rules - three .jar files
SWE - no files here
SVT - no files here
SWT - no files here
TAL - no files here

...and My car is X3(F25) built on 9/2011.
Appreciate 0
      11-08-2012, 08:03 AM   #268
pacecapt
Private
9
Rep
85
Posts

Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida

iTrader: (0)

Garage List
2014 BMW 435i  [0.00]
2013 BMW X3 28i  [0.00]
Quote:
Originally Posted by April1 View Post
To view your cafd files when not connected to car, you should save your SVT during the last connection to car. Following are the steps:

Connect to the car
As usual read FA and SVT
Now save FA and SVT to a location of your choice but outside E-Sys.
In the process save all the cafd files too
Disconnect ESys

You are now ready for off line reading.

Start ESys
Don't press connect button
Press load to load saved FA (this may be optional)
Press load to load SVT
Right click on any green cafd file marker and New>FDL
Point to the right saved cafd file

Now follow your steps
Thanks, that is what I did not do. I had only saved my cadf files and not the FA nor the SVT. Thanks for the the assist.
Appreciate 0
      11-08-2012, 08:17 AM   #269
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by pacecapt View Post
How do I load my vehicle coding (CAF/.ncd) files into E-Sys in order to edit or view them when not connected to my vehicle? I have gone through the E-Sys "Editors and Viewers" Tab documentation but it seems to have missed a step. I am able to copy and move the .ncd files but I can't seem to load them as it keeps asking me for an FA and that folder is empty. I have not been able to connect the dots between page 2 and 3 of that Tab.
If you want to look at your car's read ECU coding data (CAFD .ncd files), you only need to launch E-Sys, go to the Editors & Viewers, open the FDL-Editor, put your PIN in, and then navigate to your CAF folder (C:\ESysData\CAF) and select the desired CAFD file's corresponding read coding data .ncd file.

If you want to look at an unread CAFD file, launch the CAF-Viewer, and then navigate to your CAFD folder (C:\ESysData\psdzdata\swe\cafd) and select the desired CAFD.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-08-2012, 08:47 AM   #270
pacecapt
Private
9
Rep
85
Posts

Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida

iTrader: (0)

Garage List
2014 BMW 435i  [0.00]
2013 BMW X3 28i  [0.00]
I have tried both your way and April1 and I get an error message "No EST file chosen". I have associated the cadf files to the SVT but still can't get any further.
Appreciate 0
      11-08-2012, 09:31 AM   #271
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by pacecapt View Post
I have tried both your way and April1 and I get an error message "No EST file chosen". I have associated the cadf files to the SVT but still can't get any further.
Copy "e-sys est" folder from "\\BMW E-Sys\E-Sys Program\e-sys est" to "C:\ESysData\e-sys est"

Launch E-Sys, and Under Options, Settings:

On the EST Tab, set the Developer-Soft-Token EST Path to "C:\ESysData\e-sys est\Code Away.est"

Also, while there, make sure that on the PROGRAM TAB, you set the Directories - Data Path to C:\ESysData
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-08-2012, 09:57 AM   #272
pacecapt
Private
9
Rep
85
Posts

Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida

iTrader: (0)

Garage List
2014 BMW 435i  [0.00]
2013 BMW X3 28i  [0.00]
Quote:
Originally Posted by pacecapt View Post
I have tried both your way and April1 and I get an error message "No EST file chosen". I have associated the cadf files to the SVT but still can't get any further.
I figured it out I had not pointed the software to the codeaway file in the EST Folder.
Appreciate 0
      11-17-2012, 04:15 AM   #273
ricksters
New Member
United_States
0
Rep
7
Posts

Drives: 2013 X3 28i
Join Date: Aug 2012
Location: Pittsburgh, Pa

iTrader: (0)

Anyone coding in the Pittsburgh area?
Appreciate 0
      11-17-2012, 11:39 PM   #274
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Quote:
Originally Posted by chx437 View Post
Thanks April!
Perhaps you can give some further quidance based on following info:

My psdzdata folder "c:\ESysSData\psdzdata" contains all files extracted by WinRAR from the original psdzdata 47.4 rar -packages (using all the 23 downloaded *.rar files). In the "psdzdata\mainseries" subfolder there are some additional folders & files generated during the installation.

The data files in psdzdata were just extracted by WinRAR and there was no any other processing before using them, is this ok ?

The "status" of the other subfoldres in the ESysData -folder is:
CAF - no files here
EST - two files here, e.g. Code Away.est
Etc - no files here
FA - on sample xml file here
FP - no files here
Logs - several log files
ODX - no files here
Rules - three .jar files
SWE - no files here
SVT - no files here
SWT - no files here
TAL - no files here

...and My car is X3(F25) built on 9/2011.
Sorry for late reply.

psdzdata folder should have following sub-folders:
extLibs
kiswb
mainseries
mapping
security
swe
temp

please check that there is a dist folder in each of the odx folder of sub-folders of odx of each series.

Other folders and contents are corect as stated by you.
Appreciate 0
      11-18-2012, 01:49 AM   #275
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by April1 View Post
Sorry for late reply.

psdzdata folder should have following sub-folders:
extLibs
kiswb
mainseries
mapping
security
swe
temp

please check that there is a dist folder in each of the odx folder of sub-folders of odx of each series.

Other folders and contents are corect as stated by you.
The Temp folder is not needed and may or may not exist depending on the PSdZData version and who packaged it. I think it may actually be created by E-Sys after running it, as I have the folder now, but it was not in the original downloaded 47.5 PSdZData.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      11-18-2012, 02:07 AM   #276
April1
Love All
April1's Avatar
United_States
170
Rep
740
Posts

Drives: X3 28i 2011
Join Date: Nov 2011
Location: San Francisco

iTrader: (2)

Quote:
Originally Posted by shawnsheridan View Post
The Temp folder is not needed and may or may not exist depending on the PSdZData version and who packaged it. I think it may actually be created by E-Sys after running it, as I have the folder now, but it was not in the original downloaded 47.5 PSdZData.
Yes ESYS creates the temp folder, so it can be ignored.
Appreciate 0
      11-29-2012, 03:54 PM   #277
X3Bimmer
Private First Class
29
Rep
164
Posts

Drives: '13 X3 35i - %E2%80%9821 X3 M4
Join Date: Feb 2012
Location: USA

iTrader: (0)

I'm up and going on coding to get the X3 just they way we like it...

Many thanks to April1 for his time and support.

Cheers
Appreciate 0
      11-29-2012, 08:51 PM   #278
BeeMdblU
Captain
BeeMdblU's Avatar
Canada
447
Rep
859
Posts

Drives: F86, F25, G16
Join Date: May 2012
Location: Montreal

iTrader: (0)

Quote:
Originally Posted by X3Bimmer View Post
I'm up and going on coding to get the X3 just they way we like it...

Many thanks to April1 for his time and support.

Cheers
report back what you did
Appreciate 0
      11-30-2012, 02:59 PM   #279
BBender
Private
23
Rep
88
Posts

Drives: X3
Join Date: Jan 2012
Location: ZZ

iTrader: (0)

Does anyone knows how to enable display % of battery's charge?
Attached Images
 
Appreciate 0
      11-30-2012, 04:57 PM   #280
X3Bimmer
Private First Class
29
Rep
164
Posts

Drives: '13 X3 35i - %E2%80%9821 X3 M4
Join Date: Feb 2012
Location: USA

iTrader: (0)

Quote:
Originally Posted by X3Bimmer View Post
I'm up and going on coding to get the X3 just they way we like it...

Many thanks to April1 for his time and support.

Cheers
Coded thus far:

close trunk/tailgate with key fob and with driverside button
DVD in Motion
disabled iDrive and camera disclaimer
temp and pressure to TPMS screen
show gear (S1-S7) in sport mode
pressure and temp readings in TPMS
unlock doors when engine stops
close mirros+windows+moon roof through key fob and comfort access
fog lights w/high beams
digital speed displayed in BC
set auto stop/start to last setting by default

Also coded weatherband

Last edited by X3Bimmer; 12-04-2012 at 08:30 PM..
Appreciate 0
      12-01-2012, 12:15 PM   #281
BBender
Private
23
Rep
88
Posts

Drives: X3
Join Date: Jan 2012
Location: ZZ

iTrader: (0)

"show gear (S1-S7) in sport mode"
how this is made?
Appreciate 0
      12-01-2012, 03:16 PM   #282
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by BBender View Post
"show gear (S1-S7) in sport mode"
how this is made?
EGS module, set both of these to aktiv:

Sportschalter
Sportschalter_alt
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      12-01-2012, 04:57 PM   #283
pmacd55
Private First Class
pmacd55's Avatar
8
Rep
145
Posts

Drives: 2016 M235xi
Join Date: Sep 2012
Location: NH

iTrader: (1)

Garage List
2013 BMW X3  [0.00]
2011 328 xi  [0.00]
Finally got a chance to do some coding ... reminds me a little of changing registry settings in windows anyways got:

DVD in Motion
Disabled iDrive and camera disclaimer

More tommorrow.

Big thanks to April1 got his coding kit and works perfect right out of the box !
Appreciate 0
      12-02-2012, 07:52 PM   #284
boogysbmw
Noice
boogysbmw's Avatar
125
Rep
217
Posts

Drives: 2023 BMW iX 50drive
Join Date: Nov 2012
Location: Upstate New York

iTrader: (1)

Garage List
Hey guys, I just tried coding and I am missing modules such as HU_CIC and CMD_Media??

Any ideas why? I was able to code BKOMBI and gain access to the MPH on the BC

Any immediate help would be gratefully appreciated
Attached Images
 
__________________
2023 BMW iX xDrive50 - Blue Ridge Mountain Metallic / Oyster Perforated / Ultimate PKG 2 / Sport PKG

2023 BMW X1 xDrive28i - Portimao Blue Metallic / Black perforated /Shadowline/ M sport / premium package
Appreciate 0
      12-02-2012, 08:03 PM   #285
shawnsheridan
General
shawnsheridan's Avatar
United_States
10312
Rep
40,130
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by boogysbmw View Post
Hey guys, I just tried coding and I am missing modules such as HU_CIC and CMD_Media??

Any ideas why? I was able to code BKOMBI and gain access to the MPH on the BC

Any immediate help would be gratefully appreciated
Your Head Unit is HU_CHAMP instead of HU_CIC because you do not have 609 Navigation. You do not have CMB_MEDIA, because you do not have 6VC Combox. And as you already discovered your KOMBI is BKOMBI for basic Instrument Cluster.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      12-02-2012, 08:08 PM   #286
boogysbmw
Noice
boogysbmw's Avatar
125
Rep
217
Posts

Drives: 2023 BMW iX 50drive
Join Date: Nov 2012
Location: Upstate New York

iTrader: (1)

Garage List
that sucks! so i can't unlock half of these cool new features!!! very sad day indeed wasted money on a cable for nothing
__________________
2023 BMW iX xDrive50 - Blue Ridge Mountain Metallic / Oyster Perforated / Ultimate PKG 2 / Sport PKG

2023 BMW X1 xDrive28i - Portimao Blue Metallic / Black perforated /Shadowline/ M sport / premium package
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:27 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST