[Scandic24]

Originally Posted by ROBNYC

LIterally yes, 0-60 4.7secs , Launch Control is amazing!
The X4 M40i was made for 1/4 mile running lol

335GT is lighter and should be faster with its tune enabled, but since its a Piggyback and the weather was 80F it didnt work that way.
Literally we were running stock times due to the high humidity even the X5Ms that went with us.

What was the 0-60 for the GT?

[FSociety]

Originally Posted by Scandic24

What was the 0-60 for the GT?

We didn't measure 0-60 on these runs, we were measuring 1/4 mile times.
I posted our slips of each run on the 1st page here , the drag strip measures your 60' foot among other things but no 0-60 mph.

[PIEZON]

Originally Posted by ROBNYC

LIterally yes, 0-60 4.7secs , Launch Control is amazing!
The X4 M40i was made for 1/4 mile running lol

335GT is lighter and should be faster with its tune enabled, but since its a Piggyback and the weather was 80F it didnt work that way.
Literally we were running stock times due to the high humidity even the X5Ms that went with us.

That is so cool! 0-60 is where you have the most fun day to day!

[FSociety]

Originally Posted by PIEZON

That is so cool! 0-60 is where you have the most fun day to day!

Whats your 0-60 ?

[PIEZON]

Originally Posted by ROBNYC

Whats your 0-60 ?

I'm not sure! I know factory 300 hp/lb-ft torque is stated as 5.5 (I believe). Now I'm sporting 360 hp/392 lb-ft so I'm sure it's better.

[FSociety]

Originally Posted by PIEZON

I'm not sure! I know factory 300 hp/lb-ft torque is stated as 5.5 (I believe). Now I'm sporting 360 hp/392 lb-ft so I'm sure it's better.

300hp/300tq at Crank, equals to approximately 280wheelhorsepower 280wheeltorque but some cars vary more or less.
360hp/392tq by Dinan at the crank as well not sure what it puts down on wheels but you should prob join us on the DynoDay sometime late June or July (saturday morning) if you ever want to know the truth

Also get/install Dinan app on your phone, so when we are at the drag-strip or dyno you can disable it as your last run and use it as a baseline

My 355hp/343tq at the crank rated stock put down on the Dyno 339whp 331wtq
And car was pretty heat-soaked since it was the last run, the other runs we were testing some piggyback.

[PIEZON]

Originally Posted by ROBNYC

300hp/300tq at Crank, equals to approximately 280wheelhorsepower 280wheeltorque but some cars vary more or less.
360hp/392tq by Dinan at the crank as well not sure what it puts down on wheels but you should prob join us on the DynoDay sometime late June or July (saturday morning) if you ever want to know the truth

Also get/install Dinan app on your phone, so when we are at the drag-strip or dyno you can disable it as your last run and use it as a baseline

My 355hp/343tq at the crank rated stock put down on the Dyno 339whp 331wtq
And car was pretty heat-soaked since it was the last run, the other runs we were testing some piggyback.

Sounds good! Thanks Rob!!!

[Crashnbrn5]

Originally Posted by Scandic24

What was the 0-60 for the GT?

Stock is 5.2, but with my tune I have done 4.6- 4.7 seconds. So basically it is as fast as a non-GT 335.

Mind you the GT is a whopping 300 lbs heavier than 335i