10-07-2022, 03:41 AM | #1 |
New Member
0
Rep 16
Posts |
Region and language change X3 F25
Hi guys,
can someone guide me how to change region and language from US to Polish please? I need some step by step guidance for Esys or other software in which I could do that. I'm not really familiar with esys but I've used NCS and Inpa in EXX before so not issue to learn something new, just need few tips how this should be done properly, thx. |
10-07-2022, 06:09 AM | #2 |
Captain
126
Rep 615
Posts |
You cannot do it. The Head unit of the NA models and the European models are different as well as the KOMBI computer. Some variables are present in the head unit but the language files for visual and audio aids are not there.
In order to get that going you will need to replace those elements at a minimum and the diversity antenna to get all that working. Then, you can do a full reflash that will give you a whole load of European languages provided all other prerequisites are met. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|