Welcome to the ultimate BMW X3 community.
| 01-10-2016, 01:52 AM | #1 |
|
New Member
2
Rep 7
Posts |
Firewall access and constant 12v fuse in glove box
Since my X4 30d is on the way and this is my fist BMW, I'd like to plan some installations in advance.
First of all, I need to figure out the easiest way for putting a couple of wires from laser jammer heads through firewall. I found this DIY Is it OK for F26 or there's another, better way? The next thing I need is a fuse in glove box fuse panel with constant 12V for powering up the GSM-module to control auxiliary heater. There're some DIYs for other models (eg. this one), but unfortunately I didn't find anything for F25/F26. Is there such a fuse with constant 12v in glove box fuse panel? What about OBD fuse? |
| 01-11-2016, 08:03 AM | #2 |
|
Nuclear Chief of the Watch
120
Rep 637
Posts |
hi there is a 12v live in the obd, I use for trickle charging the battery... pin 16 12v live pin 4 12 ground
__________________
BMW i3 (BEV) 2014. . Capparis White. . Park Assist, Comfort Access, Enhanced USB
BMW X3 (F25) xDrive20d SE 2017. . . . Oyster Leather . . 8 Speed Servotronic. .RFTs. . Electric Seats Canon 70D 500mm, 85mm, 40mm, 24mm Sony QX10 & GoPro Hero 3 |
|
Appreciate
0
|
| 01-14-2016, 08:59 PM | #3 |
|
Captain
 
43
Rep 764
Posts |
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
