Coding made Easy: A step by step procedure

CostinLogin · 05-13-2015, 02:34 PM

I finally managed to solve the problem. My ENET cable had a wire wrong soldered. I reviewed the scheme and corrected the mistake. Now my cable works like a charm

Thanks for your time shawnsheridan

But first I have to make a backup of my car settings before I proceed with coding.

shawnsheridan · 05-13-2015, 10:09 PM

Quote:

Originally Posted by CostinLogin

I finally managed to solve the problem. My ENET cable had a wire wrong soldered. I reviewed the scheme and corrected the mistake. Now my cable works like a charm

Thanks for your time shawnsheridan

But first I have to make a backup of my car settings before I proceed with coding.

You make or buy this cable?

CostinLogin · 05-14-2015, 01:48 AM

Quote:

Originally Posted by shawnsheridan

You make or buy this cable?

I've made my own cable. I bought an OBD II connector, shilded RJ-45 and 1.5m CAT5e cable plus a 516 ohm 1/4 watt resistor. I'm still in the process of reading the thred looking for exact info on how to make a backup on my car computers before start coding. Do you think it could be other problems with my cable ?

shawnsheridan · 05-14-2015, 06:09 AM

Quote:

Originally Posted by CostinLogin

I've made my own cable. I bought an OBD II connector, shilded RJ-45 and 1.5m CAT5e cable plus a 516 ohm 1/4 watt resistor. I'm still in the process of reading the thred looking for exact info on how to make a backup on my car computers before start coding. Do you think it could be other problems with my cable ?

Backup is pointless. You can reset any ECU simply by VO Coding it.

Cable should be good to go now.

SpeedDemon7 · 05-14-2015, 02:57 PM

Can windows XP be used for the coding software?

shawnsheridan · 05-14-2015, 03:22 PM

Quote:

Originally Posted by SpeedDemon7

Can windows XP be used for the coding software?

Yes.

rcarlos · 05-14-2015, 08:58 PM

Hi Shawn,

I would like to request the latest Esys software and psdzdata.
I have 2015 X3 20d.
Thank you.

shawnsheridan · 05-15-2015, 02:34 AM

Quote:

Originally Posted by rcarlos

Hi Shawn,

I would like to request the latest Esys software and psdzdata.
I have 2015 X3 20d.
Thank you.

PM sent.

treydawg · 05-16-2015, 08:29 AM

I'm getting 8 errors when reading in the modules. I think my pszdata version is incorrect? I have a 2013 X3 and I am using PSdZDATA v.54.1. Thoughts?

shawnsheridan · 05-16-2015, 08:31 AM

Quote:

Originally Posted by treydawg

I'm getting 8 errors when reading in the modules. I think my pszdata version is incorrect? I have a 2013 X3 and I am using PSdZDATA v.54.1. Thoughts?

You need to update.

PM sent.

Spitfire- · 05-16-2015, 11:29 AM

Hi Shawn,

It looks like the dealer updated my vehicle when it was in service this week. Could you send me the latest psdzdata files? I'm currently using v54.1.

Current I-Step is F025-15-03-503

Thanks

shawnsheridan · 05-16-2015, 11:40 AM

Quote:

Originally Posted by Spitfire-

Hi Shawn,

It looks like the dealer updated my vehicle when it was in service this week. Could you send me the latest psdzdata files? I'm currently using v54.1.

Current I-Step is F025-15-03-503

Thanks

PM sent.

Ranger 6 · 05-16-2015, 11:42 AM

Sorry to hi-jack....

Any coders in the UK (south east) able to help a new owner?

treydawg · 05-16-2015, 12:19 PM

Quote:

Originally Posted by shawnsheridan

You need to update.

PM sent.

Thanks Shawn. I updated with no errors this time. I am not seeing what I think I should be when I go to edit the HU_CIC. I have attached what I am seeing.

shawnsheridan · 05-16-2015, 12:22 PM

Quote:

Originally Posted by treydawg

Thanks Shawn. I updated with no errors this time. I am not seeing what I think I should be when I go to edit the HU_CIC. I have attached what I am seeing.

If you are using E-Sys Launcher 2.x, you would not see Trimmed CAFD like this.

abcpop · 05-16-2015, 03:24 PM

Hi Shawn
Kindly pm me the info for E-Sys Launcher 2.x and latest PSdZDATA (lite if available)

Many thanks

Spitfire- · 05-16-2015, 04:34 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks Shawn! I was able to re-code everything I needed.

shawnsheridan · 05-16-2015, 06:36 PM

Quote:

Originally Posted by abcpop

Hi Shawn
Kindly pm me the info for E-Sys Launcher 2.x and latest PSdZDATA (lite if available)

Many thanks

PM sent.

TomaGo · 05-17-2015, 04:44 AM

Hello shawnsheridan,

1/ Could you please send me the likns for my 2015 X4 :
- E-Sys
- Launcher
- PSdZDATA (full if useful)

2/ Is it possible and useful to upgrade all the modules like BMW can do ? (motor, combi, idrive...) ?

Thanks for your help.

Best regards

Toma

shawnsheridan · 05-17-2015, 07:47 AM

Quote:

Originally Posted by TomaGo

Hello shawnsheridan,

1/ Could you please send me the likns for my 2015 X4 :
- E-Sys
- Launcher
- PSdZDATA (full if useful)

2/ Is it possible and useful to upgrade all the modules like BMW can do ? (motor, combi, idrive...) ?

Thanks for your help.

Best regards

Toma

PM sent.

Yes, you can flash all ECU's with new firmware (program) with E-Sys using PSdZData Full. Car should be on a Commercial Grade Charger rated for 50 Amps minimum, and ideally you would use ICOM Interface instead of ENET.

TomaGo · 05-17-2015, 09:26 AM

Thanks a lot for the links :-)

About the flash of ECU's with new firmware, how can i check if i have all the lasts versions ?

Best regards

shawnsheridan · 05-17-2015, 10:16 AM

Quote:

Originally Posted by TomaGo

Thanks a lot for the links :-)

About the flash of ECU's with new firmware, how can i check if i have all the lasts versions ?

Best regards

On ECU's? Create Flash TAL, and see which ECU's are identified as Targets for new Firmware.

05-13-2015, 02:34 PM	#1519
CostinLogin New Member 6 Rep 11 Posts Drives: X3 F25 3.0d xDrive M-Pack Join Date: Apr 2015 Location: Romania iTrader: (0)	I finally managed to solve the problem. My ENET cable had a wire wrong soldered. I reviewed the scheme and corrected the mistake. Now my cable works like a charm Thanks for your time shawnsheridan But first I have to make a backup of my car settings before I proceed with coding.
	Appreciate 0 Quote

05-14-2015, 02:57 PM	#1523
SpeedDemon7 Private First Class 71 Rep 165 Posts Drives: 2015 F80 M3 Austin Yellow Join Date: Mar 2012 Location: United States iTrader: (0)	Can windows XP be used for the coding software? __________________ 2015 F80 M3 DCT : JB4 : Gintani DP : METH : BMS INTAKES : Upgraded Turbos : GTS DCT Flash 11' Z4 35i Procede REV 3 SOLD 2007 e90 335i 6MT:Procede REV 3: Raceland 2.5": VRSF 7":VRSF CHARGE pipe: Walbaro 255 inline: ACT 6 Puck: 100% e85 Garage: 2015 M3 : 2007 M5 : 2016 X1 : 2003 X5
	Appreciate 0 Quote

05-14-2015, 08:58 PM	#1525
rcarlos Registered 0 Rep 1 Posts Drives: BMW X3 F25 B47 Join Date: May 2015 Location: Taiwan iTrader: (0)	Hi Shawn, I would like to request the latest Esys software and psdzdata. I have 2015 X3 20d. Thank you.
	Appreciate 0 Quote

05-16-2015, 08:29 AM	#1527
treydawg New Member 0 Rep 5 Posts Drives: 2013 BMW X3 Join Date: Apr 2012 Location: SNJ iTrader: (0)	I'm getting 8 errors when reading in the modules. I think my pszdata version is incorrect? I have a 2013 X3 and I am using PSdZDATA v.54.1. Thoughts?
	Appreciate 0 Quote

05-16-2015, 11:29 AM	#1529
Spitfire- Private 33 Rep 51 Posts Drives: 2022 X3 M40i Join Date: Mar 2015 Location: Toronto iTrader: (0)	Hi Shawn, It looks like the dealer updated my vehicle when it was in service this week. Could you send me the latest psdzdata files? I'm currently using v54.1. Current I-Step is F025-15-03-503 Thanks
	Appreciate 0 Quote

05-16-2015, 11:42 AM	#1531
Ranger 6 Yorkshireman trapped in a Berkshire postcode 12 Rep 213 Posts Drives: X3 3.0d M-Sport Join Date: Oct 2009 Location: UK iTrader: (0) Garage List 2008 BMW X3 [0.00]	Sorry to hi-jack.... Any coders in the UK (south east) able to help a new owner? __________________ X3 3.0d M-Sport Mini Countryman Cooper S ALL4
	Appreciate 0 Quote

05-16-2015, 03:24 PM	#1534
abcpop Private 0 Rep 80 Posts Drives: F06 650i Xdrive 09/2013 Join Date: Oct 2013 Location: CH iTrader: (0)	Hi Shawn Kindly pm me the info for E-Sys Launcher 2.x and latest PSdZDATA (lite if available) Many thanks
	Appreciate 0 Quote

05-17-2015, 04:44 AM	#1537
TomaGo Private First Class 97 Rep 183 Posts Drives: BMW X4 Join Date: Oct 2014 Location: France iTrader: (0)	Hello shawnsheridan, 1/ Could you please send me the likns for my 2015 X4 : - E-Sys - Launcher - PSdZDATA (full if useful) 2/ Is it possible and useful to upgrade all the modules like BMW can do ? (motor, combi, idrive...) ? Thanks for your help. Best regards Toma
	Appreciate 0 Quote

05-17-2015, 09:26 AM	#1539
TomaGo Private First Class 97 Rep 183 Posts Drives: BMW X4 Join Date: Oct 2014 Location: France iTrader: (0)	Thanks a lot for the links :-) About the flash of ECU's with new firmware, how can i check if i have all the lasts versions ? Best regards
	Appreciate 0 Quote