Coding made Easy: A step by step procedure

murrr77 · 11-21-2014, 12:03 PM

Hi! Will you please send me a link to the correct esys, token, and psdz for my 2012 X3 (manufactured in 12/2011).

Thank you!

cbf25x3 · 11-22-2014, 12:47 AM

Shawn,

Can you please send me the latest esys software and psdzdata tool?

Thanks

gc3 · 11-22-2014, 12:51 PM

I know this process isn't all that complicated, but I didn't want to deal with the learning curve, so went ahead and just paid someone experienced here in the DC area to add some useful features to my 2015 x35i built on 10/30/2014:

variable light distribution
disable i-drive accept screen
fold/open mirrors on lock/unlock
windows, rear hatch and moonroof close via fob
enhanced bluetooth / office
sport+ mode added
turn signals in HUD

The software he used needed to be updated to deactivate the seatbelt chime, so I'll go back for that. And I forgot to have the road edge detection feature added for lane departure warning. But all in all a quick and painless (except for the cost) experience.

MMM3PWR · 11-24-2014, 04:27 PM

Is there a way to code the throttle response? I have a 2012 2.8 and it seems that when I hit the throttle I have to push it down then get a sudden burst and cannot just drive off slowly without the jolt...I do drive a m3 as this is my wife's car however it's really annoying

jfurtner · 11-24-2014, 08:29 PM

Hello,

Can you please send me how to get the E-Sys software and PSDZData?

Thanks

April1 · 11-24-2014, 08:48 PM

Shawn should be able to help you.

gglez · 11-25-2014, 07:06 AM

Hi SHawn,

Can you please, send me the latest esys software and psdzdata as well?
My car info is: 04/2011 F25 X3 20dX SUV N47N Europe Left hand drive N, Production Code: WY31

Thanks a lot!
gglez

shawnsheridan · 11-25-2014, 08:11 AM

Quote:

Originally Posted by jfurtner

Hello,

Can you please send me how to get the E-Sys software and PSDZData?

Thanks

Quote:

Originally Posted by gglez

Hi SHawn,

Can you please, send me the latest esys software and psdzdata as well?
My car info is: 04/2011 F25 X3 20dX SUV N47N Europe Left hand drive N, Production Code: WY31

Thanks a lot!
gglez

PM's sent.

cbf25x3 · 11-25-2014, 10:22 AM

Hi SHawn,

Can you please send me the latest esys software and psdzdata as well?

Thanks

shawnsheridan · 11-25-2014, 10:41 AM

Quote:

Originally Posted by cbf25x3

Hi SHawn,

Can you please send me the latest esys software and psdzdata as well?

Thanks

PM sent.

TonyX3driver · 11-28-2014, 05:35 AM

Hi Shawn,

I'm pretty new here. Read thru all this forum (and more others:-) )
Buinding my ENET Cable just now.
Want to play over the Christmas :-)

Can you please send me the latest esys software and psdzdata as well?

Thank you

shawnsheridan · 11-28-2014, 09:03 AM

Quote:

Originally Posted by TonyX3driver

Hi Shawn,

I'm pretty new here. Read thru all this forum (and more others:-) )
Buinding my ENET Cable just now.
Want to play over the Christmas :-)

Can you please send me the latest esys software and psdzdata as well?

Thank you

PM sent.

drodnyc · 11-28-2014, 09:41 AM

guys, can someone tell me what the enhanced bluetooth coding does? also, the sport + added?

i coded almost everything i could think of but wasn't sure about these two.

sorry if i missed reading it on an older post.

TonyX3driver · 11-28-2014, 12:34 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thakn you shawn.
Will inform you guys about the result on my car.
Hope i will not brick it.....

BTW- is here somebody who experience any anomalies after coding??

regards to all BMW fans! Tony

cjban · 11-30-2014, 05:00 PM

Quote:

Originally Posted by abcpop

Installing E-sys on a new PC I got empty list

What could be wrong ?

Thanks

Hi abcpop,

Did you figure out the issue? I am having the same issue and I have set up psdzdata as per instructions - not sure what I am doing wrong..

Thanks.

shawnsheridan · 11-30-2014, 07:07 PM

Quote:

Originally Posted by cjban

Hi abcpop,

Did you figure out the issue? I am having the same issue and I have set up psdzdata as per instructions - not sure what I am doing wrong..

Thanks.

If the "Open Connection" window under "Target" is empty (no targets), verify the following:

That the "psdzdata" folder is installed properly (From the PSdZData_Lite or PSdZData_Full extraction, copy the "psdzdata" folder to "C:\Data\" (i.e. "C:\Data\psdzdata")
That the psdzdata chassis folders each have an empty "dist" folder. Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:
- C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\I001\I001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\K001\K001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\KE01\KE01_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\RR01\RR01_xx_xx_xxx\od x\dist
The the E-Sys "Options" => "Settings" => "Directories => Data: path" is set properly (e.g. "C:\Data")

TonyX3driver · 12-01-2014, 01:51 PM

Quote:

Originally Posted by drodnyc

guys, can someone tell me what the enhanced bluetooth coding does? also, the sport + added?

i coded almost everything i could think of but wasn't sure about these two.

sorry if i missed reading it on an older post.

what year is your X3?
mine is 2011 and I have 3 modes to select- Normal, Sport, Sport+
My friend's 2013 has EcoPro, Normal, Sport. As he said, EcoPro usable for pensioneer only, not why we bought beamer...

gc3 · 12-01-2014, 06:36 PM

Enhanced Bluetooth will get you the full BMW Office functionality...

jeschiotz · 12-02-2014, 06:23 AM

Hi Shawn, can you also pls point me to the latest Esys software and psdzdata?

shawnsheridan · 12-02-2014, 07:13 AM

Quote:

Originally Posted by jeschiotz

Hi Shawn, can you also pls point me to the latest Esys software and psdzdata?

PM sent.

m3.nasr · 12-02-2014, 03:21 PM

So I was coding a buddy's F25 X3 with a refurbished EPS unit. All was working and car was driving except it did not have CAFD values inputted for the EPS unit. I went to code in the CAFD values for the EPS ECU but I mistakingly entered the wrong values and it accepted it, but now the EPS unit stopped working and car only drives now with rough physical manual effort. Current Integration I-Step is (F025-13-11-502). I've since gone back in to re-code in the correct CAFD values for the EPS and it is saving the correct EPS values, but its still not working. Is there any way to fix this situation?
Any help would be appreciated. April1 or shawn, anyone?? Thanks guys.

shawnsheridan · 12-02-2014, 03:42 PM

Quote:

Originally Posted by m3.nasr

So I was coding a buddy's F25 X3 with a refurbished EPS unit. All was working and car was driving except it did not have CAFD values inputted for the EPS unit. I went to code in the CAFD values for the EPS ECU but I mistakingly entered the wrong values and it accepted it, but now the EPS unit stopped working and car only drives now with rough physical manual effort. Current Integration I-Step is (F025-13-11-502). I've since gone back in to re-code in the correct CAFD values for the EPS and it is saving the correct EPS values, but its still not working. Is there any way to fix this situation?
Any help would be appreciated. April1 or shawn, anyone?? Thanks guys.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on EPS => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on EPS (the ECU itself not the underlying CAFD) => Select CODE.

11-21-2014, 12:03 PM	#1167
murrr77 Registered 0 Rep 3 Posts Drives: 2012 X3 xDrive28i Join Date: Nov 2014 Location: Omaha iTrader: (0)	Hi! Will you please send me a link to the correct esys, token, and psdz for my 2012 X3 (manufactured in 12/2011). Thank you! Last edited by murrr77; 12-05-2014 at 03:46 PM..
	Appreciate 0 Quote

11-22-2014, 12:47 AM	#1168
cbf25x3 Registered 0 Rep 2 Posts Drives: 2015 X3 MSport Join Date: Oct 2014 Location: California iTrader: (0)	Shawn, Can you please send me the latest esys software and psdzdata tool? Thanks
	Appreciate 0 Quote

11-22-2014, 12:51 PM	#1169
gc3 Private 7 Rep 55 Posts Drives: 2015 x35i Join Date: Oct 2014 Location: DC iTrader: (0)	I know this process isn't all that complicated, but I didn't want to deal with the learning curve, so went ahead and just paid someone experienced here in the DC area to add some useful features to my 2015 x35i built on 10/30/2014: variable light distribution disable i-drive accept screen fold/open mirrors on lock/unlock windows, rear hatch and moonroof close via fob enhanced bluetooth / office sport+ mode added turn signals in HUD The software he used needed to be updated to deactivate the seatbelt chime, so I'll go back for that. And I forgot to have the road edge detection feature added for lane departure warning. But all in all a quick and painless (except for the cost) experience.
	Appreciate 0 Quote

11-24-2014, 04:27 PM	#1170
MMM3PWR E90 6MT MASTER 74 Rep 314 Posts Drives: 2008 M3 Join Date: Mar 2013 Location: Porto Heli iTrader: (0)	Is there a way to code the throttle response? I have a 2012 2.8 and it seems that when I hit the throttle I have to push it down then get a sudden burst and cannot just drive off slowly without the jolt...I do drive a m3 as this is my wife's car however it's really annoying __________________
	Appreciate 0 Quote

11-24-2014, 08:29 PM	#1171
jfurtner Registered 0 Rep 1 Posts Drives: 2015 F25 x3 35i Join Date: Nov 2014 Location: Calgary, Canada iTrader: (0)	Hello, Can you please send me how to get the E-Sys software and PSDZData? Thanks
	Appreciate 0 Quote

11-24-2014, 08:48 PM	#1172
April1 Love All 173 Rep 740 Posts Drives: X3 28i 2011 Join Date: Nov 2011 Location: San Francisco iTrader: (2)	Shawn should be able to help you.
	Appreciate 0 Quote

11-25-2014, 07:06 AM	#1173
gglez Registered 1 Rep 4 Posts Drives: X3 F25 2011 Join Date: Jan 2014 Location: Zaragoza iTrader: (0)	Hi SHawn, Can you please, send me the latest esys software and psdzdata as well? My car info is: 04/2011 F25 X3 20dX SUV N47N Europe Left hand drive N, Production Code: WY31 Thanks a lot! gglez
	Appreciate 0 Quote

11-25-2014, 10:22 AM	#1175
cbf25x3 Registered 0 Rep 2 Posts Drives: 2015 X3 MSport Join Date: Oct 2014 Location: California iTrader: (0)	Hi SHawn, Can you please send me the latest esys software and psdzdata as well? Thanks
	Appreciate 0 Quote

11-28-2014, 05:35 AM	#1177
TonyX3driver Private 15 Rep 81 Posts Drives: X3 F25 (2011), X5 F15 (2017) Join Date: Nov 2014 Location: EU iTrader: (0) Garage List 2017 BMW X5 40d [8.50] 2005 E87 120D [0.00] 2003 E46 Cabrio FL [10.00]	Hi Shawn, I'm pretty new here. Read thru all this forum (and more others:-) ) Buinding my ENET Cable just now. Want to play over the Christmas :-) Can you please send me the latest esys software and psdzdata as well? Thank you
	Appreciate 0 Quote

11-28-2014, 09:41 AM	#1179
drodnyc Private 22 Rep 95 Posts Drives: 2019 BMW X7 Join Date: Nov 2014 Location: Westchester County, NY iTrader: (0)	guys, can someone tell me what the enhanced bluetooth coding does? also, the sport + added? i coded almost everything i could think of but wasn't sure about these two. sorry if i missed reading it on an older post.
	Appreciate 0 Quote

12-01-2014, 06:36 PM	#1184
gc3 Private 7 Rep 55 Posts Drives: 2015 x35i Join Date: Oct 2014 Location: DC iTrader: (0)	Enhanced Bluetooth will get you the full BMW Office functionality... __________________ 2015 X3 xDrive35i Space Gray: ZDA \| ZDB \| ZPP \| ZTP \| Heated Seats \| 309 wheels \| coded
	Appreciate 0 Quote

12-02-2014, 06:23 AM	#1185
jeschiotz New Member 7 Rep 26 Posts Drives: BMW X3 Join Date: Jul 2012 Location: Norway iTrader: (0)	Hi Shawn, can you also pls point me to the latest Esys software and psdzdata?
	Appreciate 0 Quote

12-02-2014, 03:21 PM	#1187
m3.nasr Registered 0 Rep 4 Posts Drives: E92 M3 Join Date: Mar 2011 Location: Egypt cairo iTrader: (0)	Need help with coding F25 X3...EPS stopped working So I was coding a buddy's F25 X3 with a refurbished EPS unit. All was working and car was driving except it did not have CAFD values inputted for the EPS unit. I went to code in the CAFD values for the EPS ECU but I mistakingly entered the wrong values and it accepted it, but now the EPS unit stopped working and car only drives now with rough physical manual effort. Current Integration I-Step is (F025-13-11-502). I've since gone back in to re-code in the correct CAFD values for the EPS and it is saving the correct EPS values, but its still not working. Is there any way to fix this situation? Any help would be appreciated. April1 or shawn, anyone?? Thanks guys.
	Appreciate 0 Quote