[shawnsheridan]

Originally Posted by F07gerben

Can anyone help me which versions *E-sysX and PSDZdata) I need for coding my X5 e45 G05 ?

PM sent.

[R0gero]

Hello shawnsheridan,

you have helped me unbrick my Car's ECU (E93) from about 8 years or more and provided me with the needed files/tools, i can't tell you how much i appreciated this, so much respect for the help you offer to all members of different BMW forums.

once again i need help for Coding my X5 E70, i can use NCSexpert but i wanted something newer and easier to use like ISTA-P (i know it can do Coding for E series) or Esys ( not sure if it supports E Series coding) and i couldn't find any of these 2 programs so far.

Please your insights would be so much appreciated.

Cheers.

[shawnsheridan]

Originally Posted by R0gero

Hello shawnsheridan,

you have helped me unbrick my Car's ECU (E93) from about 8 years or more and provided me with the needed files/tools, i can't tell you how much i appreciated this, so much respect for the help you offer to all members of different BMW forums.

once again i need help for Coding my X5 E70, i can use NCSexpert but i wanted something newer and easier to use like ISTA-P (i know it can do Coding for E series) or Esys ( not sure if it supports E Series coding) and i couldn't find any of these 2 programs so far.

Please your insights would be so much appreciated.

Cheers.

ISTA/P is only for E-Series Programming / Encoding, so no custom coding like NCS Expert. PM sent.

[abhi234u]

Need to get my sunroof for 2011 BMW X3 28i programmed. It was showing on the scanner that it had some error and my mechanic accidentally cleared the codes. Can anyone guide me to a cheaper option? Thanks

[shawnsheridan]

Originally Posted by abhi234u

Need to get my sunroof for 2011 BMW X3 28i programmed. It was showing on the scanner that it had some error and my mechanic accidentally cleared the codes. Can anyone guide me to a cheaper option? Thanks

Program it with E-Sys. PM sent.

[ghostrider1969]

Hi
I've recently retrofitted comfort seats with lumbar, heating and memory and electric trunk on my F10 530dx (European version). Everything works fine, except for the seats heating. The check with BimmerLink gets the following errors:

00 Junction Box Electronics
1 error
030195: FH BFH: invalid characteristic, no standardization available

01 Crash Safety Module
1 error
930B8F: Passenger SBR sensor - interruption

02 Switch center, steering column
1 error
803407: Electric steering column adjustment (ELSV), cable to button: short circuit to positive or cable break

72 Footwell module
3 errors
800FA0: ELSV Hall sensor horizontal adjustment Short circuit to ground
800F9C: ELSV Hall sensor vertical adjustment Short circuit to ground
800E88: Inconsistency: HW coding and SW coding implausible

78 Integrated automatic heating / air conditioning system
6 errors
8011BB: Stratification potentiometer on the right: short circuit to plus or interruption
801253: eKMV: Power reduction in cooling or heating operation through power management
801222: Compressor: shutdown due to lack of DME approval
E70C25: AC-LIN-1: Motor in the rear left footwell does not respond, Bus Error Slave 8
E70C26: AC-LIN-1: Motor in the rear right footwell does not respond, Bus Error Slave 9
E70C29: AC-LIN-1: Motor stratification, rear left, does not respond, bus error slave 13

It must be said that the donor vehicle is F10 550ix Prod. Date 2010-11-10, equipped, inter alia, with S4NB Autom. Climate Control With 4-Zone. Mine was equipped with base seats and 2-Zone clima

1) I was wondering if you have solved the problem with the stearing column (error in orange)
2) the errors in green I think are related to the different configuration of clima: how can I solve with coding?
3) the error in purple is related to the different sensor type: the donor car was equipped with 3 wires type (bus, "+" and "-"), mine with 2 wire type (+ and -). I inserted the + and - of the donor car on the same pins occupied by my wires in the ACSM, but evidently it doesen't work. I read as alternative solution that I could code my passenger seat as M5, that doesn't have occupancy sensor, but I don't know how to do that;
4) the remaining errors I think are related with CAFD problems, but I don't know how to find the right CAFD's and inject them on the right ECUs

shawnsheridan can you help me please?