[dpham1]

Originally Posted by dpham1

I did exactly what you told me but still couln't manage to do it. I'm wondering if I have missed something regards to installation (maybe a connector or something)

When I wrote SVT, it states " the following ECUs have wrong bus ID: FEM_GW, FEM_Body, SM2, REM, IHKA3, HU Entry" (you can see the attachments)" but I wrote anyways

After writing Edited SVT file, I read ECUs again but still cant see KOMBI (you can see the attached picture)

What could have I missed?

Thanks dude!

Attachment 2901880

Attachment 2901881

Hi Shawn,

When I open e-sys luancher, it states that my EST Software Token is invalid so I couldn't open the software.

I remember that after June we have a new software or something to launch e-sys so Please tell me what I need to do to get e-sys working again?

Many thanks dude!

[shawnsheridan]

Originally Posted by dpham1

Hi Shawn,

When I open e-sys luancher, it states that my EST Software Token is invalid so I couldn't open the software.

I remember that after June we have a new software or something to launch e-sys so Please tell me what I need to do to get e-sys working again?

Many thanks dude!

PM sent.

[P3dr0]

Hi Shawn,

Please could you assit with the latest S-Sys and PSdZData.

My VIN: 0B52295

Cheers
Pedro

[shawnsheridan]

Originally Posted by P3dr0

Hi Shawn,

Please could you assit with the latest S-Sys and PSdZData.

My VIN: 0B52295

Cheers
Pedro

PM sent.

[dom2497]

Hello Can you share with me Esys, psdzata and Launcher Pro for my UK LCI M2. Thanks

[shawnsheridan]

Originally Posted by dom2497

Hello Can you share with me Esys, psdzata and Launcher Pro for my UK LCI M2. Thanks

Your Receive PM function is disabled. PM me when working.

[Capnwillyp]

Hi Shawn,
My 2013 F25 was shipped with a CIC HU with the PDC (508A) and Surround View camera system (TRSVC). I recently swapped out the CIC for an NBT Evo HU and everything works as before, exceptÂ…

The PDC sounds work but nothing shows up on the screen when I go into reverse or press the PDC button. I have the TRSVC connected to the proper FBAS1 pins on the Evo HU and the PDC beeps work which leads me to believe that ECU is connected properly. (ISTA and E-Sys both show the TRSVC and PDC ECUs connected. The PDC appears to be integrated with the JBE box.)

Is there some HU coding I need? Is my PDC system Gen1 or Gen2? (It has 4 sensors on the front bumper and 4 sensors on the Rear bumper.)

(Thiis swap did not involve any sort of aftermarket adapter.)

[Capnwillyp]

Replying to my own post…

Figured it out!
Coded the Evo as follows:

MACRO_PMA_EINPARKEN to gen1 (was nicht_aktiv)
COMMUNICATION_PARKMASTER to gen1 (was gen2)
CAMERA_SYSTEM to trsvc (was icam_high)

Other relevant settings were OK (PDC_GENERATION = gen1, front and rear sensors set to 4 each, CAM_ECU = werte 01, MACRO_TV_C and MACRO_RV_C both = aktiv).

[shawnsheridan]

Originally Posted by Capnwillyp

Replying to my own post…

Figured it out!
Coded the Evo as follows:

MACRO_PMA_EINPARKEN to gen1 (was nicht_aktiv)
COMMUNICATION_PARKMASTER to gen1 (was gen2)
CAMERA_SYSTEM to trsvc (was icam_high)

Other relevant settings were OK (PDC_GENERATION = gen1, front and rear sensors set to 4 each, CAM_ECU = werte 01, MACRO_TV_C and MACRO_RV_C both = aktiv).

[Cambridge]

Are EST tokens required anymore if using BimmerUtility and E-Sys 3.40?

[shawnsheridan]

Originally Posted by Cambridge

Are EST tokens required anymore if using BimmerUtility and E-Sys 3.40?

No token needed.

[uadissa]

hey guys any chance sending a latest psdzdata lite link ? My i-step has been upgraded by dealer to S15a-22. Quite new. Current version I have ( 4.27.x) goes only upto i-step-15a-20-11

[shawnsheridan]

Originally Posted by uadissa

hey guys any chance sending a latest psdzdata lite link ? My i-step has been upgraded by dealer to S15a-22. Quite new. Current version I have ( 4.27.x) goes only upto i-step-15a-20-11

PM sent.

[DBTinLV]

Hello, newbie here. Followed all instructions (i think) but get error when attempting "SVT Actual - Read (VCM)":

Caused by: java.lang.Exception: ============================================
ECUId:VCM_0x10
job failed with job failed with negative response error:
code: service returned global negative response
description: Service RC_RLE_VCM returned a negative response with response code requestOutOfRange; LinkName: VCM_ETHERNET severity: ERROR

Verified connectivity by pinging the IP of the car from PC.

Any ideas?

Here's my details:
2021 X3, G01
E-sys: 3.40.1
PsdZData_Lite_v4.36.12
Target: S15A_22_07_521_V_004_001_000
(Also tried with the other S15A target, same result.)

[shawnsheridan]

Originally Posted by DBTinLV

Hello, newbie here. Followed all instructions (i think) but get error when attempting "SVT Actual - Read (VCM)":

Caused by: java.lang.Exception: ============================================
ECUId:VCM_0x10
job failed with job failed with negative response error:
code: service returned global negative response
description: Service RC_RLE_VCM returned a negative response with response code requestOutOfRange; LinkName: VCM_ETHERNET severity: ERROR

Verified connectivity by pinging the IP of the car from PC.

Any ideas?

Here's my details:
2021 X3, G01
E-sys: 3.40.1
PsdZData_Lite_v4.36.12
Target: S15A_22_07_521_V_004_001_000
(Also tried with the other S15A target, same result.)

Use Read (ECU), not Read (VCM).

[DBTinLV]

Wow, Bingo! Thanks for super fast response. Now on to the fun part. Will probably be back...

[uadissa]

Originally Posted by shawnsheridan

PM sent.

Thanks for this. Psdzdata was up to date and it had I-step-15a-22-x included. Initially had an error connecting on esys with the new istep, which was fixed by the esysx support guys. Basically using esys 3.3x now instead of 3.27. I have had purchased from them a while back .

When coding, realised that cafd weren't yet trimmed or anything and was able to edit successfully within esys. Out of curiosity do you know from what version it's trimmed?

[shawnsheridan]

Originally Posted by uadissa

Thanks for this. Psdzdata was up to date and it had I-step-15a-22-x included. Initially had an error connecting on esys with the new istep, which was fixed by the esysx support guys. Basically using esys 3.3x now instead of 3.27. I have had purchased from them a while back .

When coding, realised that cafd weren't yet trimmed or anything and was able to edit successfully within esys. Out of curiosity do you know from what version it's trimmed?

BMW made changes to PSdZData beginning with 54.2 where they removed (aka Trimmed) descriptive text from CAFD (and FAFP) files, making FDL Coding of many ECU's impossible using regular PSdZData files. Yours is trimmed, but mapped by ESysX.

[kking22]

Hello Can you share with me Esys, psdzata and Launcher Pro for my M4 F83 and X4M F98

[shawnsheridan]

Originally Posted by kking22

Hello Can you share with me Esys, psdzata and Launcher Pro for my M4 F83 and X4M F98

Your Receive PM function is disabled.

And asked and answered on Bimmerfest already:

https://www.bimmerfest.com/threads/c.../post-13720703

[Glock20C]

Hi Shawn,

Newbie here. I have a 2013 F25 (5/12 production) and swapped out the CIC to a NBT EVO. Everything works after changing the ZGW Mid to ZGW-4SK. Missing function such as gyro information, no memory for XM radio stations, speaker/amplifier makes this ticking sound. However, my biggest problem I cannot get the car smogged (emissions tested). Have you had any experience with these issues and would coding help remedy this?

I have not posted enough so my PM function is still disabled.

Any thoughts/assistance is appreciated.

Thank you!

[shawnsheridan]

Originally Posted by Glock20C

Hi Shawn,

Newbie here. I have a 2013 F25 (5/12 production) and swapped out the CIC to a NBT EVO. Everything works after changing the ZGW Mid to ZGW-4SK. Missing function such as gyro information, no memory for XM radio stations, speaker/amplifier makes this ticking sound. However, my biggest problem I cannot get the car smogged (emissions tested). Have you had any experience with these issues and would coding help remedy this?

I have not posted enough so my PM function is still disabled.

Any thoughts/assistance is appreciated.

Thank you!

No, sorry, no experience at all.