[shawnsheridan]

Originally Posted by rob116

Tks. Managed to find the field to key in vin. Shd I refer to this thread page 1, 1st intro and follow the steps for coding. ?

Yes, or view Videos on YouTube.

[rob116]

Originally Posted by shawnsheridan

Yes, or view Videos on YouTube.

Tks. I will read the page 1 steps instead. May I know anyone have the code for "remember air ventilation -last memory"? Or aircond Per say

[kondziorek]

Hi Shawn, could you send me link(s) with instruction to esys? I have 2012 BMW X3 xdrive35i. Thank you in advance.

[shawnsheridan]

Originally Posted by kondziorek

Hi Shawn, could you send me link(s) with instruction to esys? I have 2012 BMW X3 xdrive35i. Thank you in advance.

PM sent.

[rob116]

Originally Posted by shawnsheridan

PM sent.

following page 1 intro steps, I managed to enable
1. Dvd motion
2. Boot tailgate trunk closed with fob n driver's button.
3. Tpms pressure n temp -failed.
4. Side mirror auto closed with fob- Failed. My remote hv 3 button, on off alarm and tailgate.
I will re visit 3 and 4 items again Bcos April recommended do one setting at once which I overlook the message. I did all at once and last 3,4 items failed.
P/s anyone with the cheat code for air vent circulation -last memory and auto start - off? Thanks.

[rob116]

Originally Posted by rob116

following page 1 intro steps, I managed to enable
1. Dvd motion
2. Boot tailgate trunk closed with fob n driver's button.
3. Tpms pressure n temp -failed.
4. Side mirror auto closed with fob- Failed. My remote hv 3 button, on off alarm and tailgate.
I will re visit 3 and 4 items again Bcos April recommended do one setting at once which I overlook the message. I did all at once and last 3,4 items failed.
P/s anyone with the cheat code for air vent circulation -last memory and auto start - off? Thanks.

Refer to page 1 intro. For newbie, The steps to select all CAFD "green marks" are important , then u browse or search by module eg HKFM, CAS, HU then only by section 3002,3010 etc.
Thanks Shawn and april.

[maddmaxx]

Shawnsheridan can I get info on E-Sys & PSdZData links and instructions? Any info provided will be greatly appreciated.

[shawnsheridan]

Originally Posted by maddmaxx

Shawnsheridan can I get info on E-Sys & PSdZData links and instructions? Any info provided will be greatly appreciated.

Your Receive PM function is disabled. PM me when working.

[maddmaxx]

Ok, thanks for the prompt response.

[rob116]

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

Shawn, I managed to code the additional for the following :- one module per time then final click code cdl before proceed to next coding.
5. Auto start stop disable now. Under CAS -3000-tc_msa- set to aktiv.
6. Remember last air circulation. IHKA-3000-UMLUFT memory- set to activ.

Hv set for items 3 &4 (tpms psi & side mirror fold). Doesn't work for me. But is good enough for me since all key items works for me now.
Thank you

[shawnsheridan]

Originally Posted by rob116

Shawn, I managed to code the additional for the following :- one module per time then final click code cdl before proceed to next coding.
5. Auto start stop disable now. Under CAS -3000-tc_msa- set to aktiv.
6. Remember last air circulation. IHKA-3000-UMLUFT memory- set to activ.

Hv set for items 3 &4 (tpms psi & side mirror fold). Doesn't work for me. But is good enough for me since all key items works for me now.
Thank you

TPMS does not work in every car. The car has to be equipped with Option S2VBA Tyre pressure control (TPC). If you do not have S2VBA, you will have FTMS. TPMS is Tire Pressure Monitoring System, aka Reifen Druck Control (RDC) and FTMS is Flat Tire Monitor System, aka Reifen Pannen Anzeige (RPA). FTMS operates on tire rotational speed and has no actual sensors to measure pressure and temperature like TPMS does.

Mirror folding on lock only works in cars with Power Folding Mirrors. If you can manually fold mirror from drivers door switch, then it can be coded to auto fold on locking.

[rob116]

Originally Posted by shawnsheridan

TPMS does not work in every car. The car has to be equipped with Option S2VBA Tyre pressure control (TPC). If you do not have S2VBA, you will have FTMS. TPMS is Tire Pressure Monitoring System, aka Reifen Druck Control (RDC) and FTMS is Flat Tire Monitor System, aka Reifen Pannen Anzeige (RPA). FTMS operates on tire rotational speed and has no actual sensors to measure pressure and temperature like TPMS does.

Mirror folding on lock only works in cars with Power Folding Mirrors. If you can manually fold mirror from drivers door switch, then it can be coded to auto fold on locking.

Thts Wht I suspect for my tpms, without the sensors type. Haha not sure how easy to chg it too better with sensors.
Mine can fold the side mirrors from a drivers button. I did double Chk the coding and it Shd hv activated but some how it does not work.

[shawnsheridan]

Originally Posted by rob116

Thts Wht I suspect for my tpms, without the sensors type. Haha not sure how easy to chg it too better with sensors.
Mine can fold the side mirrors from a drivers button. I did double Chk the coding and it Shd hv activated but some how it does not work.

Are you pressing and HOLDING the Lock button for around 20 seconds?

[rob116]

Originally Posted by shawnsheridan

Are you pressing and HOLDING the Lock button for around 20 seconds?

I see. Will try it out later.

[rob116]

Originally Posted by shawnsheridan

TPMS does not work in every car. The car has to be equipped with Option S2VBA Tyre pressure control (TPC). If you do not have S2VBA, you will have FTMS. TPMS is Tire Pressure Monitoring System, aka Reifen Druck Control (RDC) and FTMS is Flat Tire Monitor System, aka Reifen Pannen Anzeige (RPA). FTMS operates on tire rotational speed and has no actual sensors to measure pressure and temperature like TPMS does.

Mirror folding on lock only works in cars with Power Folding Mirrors. If you can manually fold mirror from drivers door switch, then it can be coded to auto fold on locking.

Hi Shawn, based on your knowledge. Can I purchase the tire pressure sensor S2VBA online and get the tire installer fix it during next tire change ? Do they needs to configure anything?

[shawnsheridan]

Originally Posted by rob116

Hi Shawn, based on your knowledge. Can I purchase the tire pressure sensor S2VBA online and get the tire installer fix it during next tire change ? Do they needs to configure anything?

Need RDC Module, Wheel Sensors, and Coding. Tire installer likley can only do Wheel Sensors.

[Delliwell]

Thanks for the tutorial!

[Oetzie97]

Hi shawnsheridan
I wanted to ask you if you could set me up with the links for the E-Sys instructions and downloads?
And a quick question, I don't know if its covered in your tutorial.. do I need a specific version of Windows 10 to work with? I was hoping to use my Surface book2 with the newest Version of Windows. (I really hope my PM privileges are enabeled by the time you read this)

Greeting from Germany

[shawnsheridan]

Originally Posted by Oetzie97

Hi shawnsheridan
I wanted to ask you if you could set me up with the links for the E-Sys instructions and downloads?
And a quick question, I don't know if its covered in your tutorial.. do I need a specific version of Windows 10 to work with? I was hoping to use my Surface book2 with the newest Version of Windows. (I really hope my PM privileges are enabeled by the time you read this)

Greeting from Germany

I am using latest version of Win 10 64-Bit without issue. No idea on new Win 11.

Your Receive PM function is disabled. PM me when working.

[rob116]

Originally Posted by shawnsheridan

Need RDC Module, Wheel Sensors, and Coding. Tire installer likley can only do Wheel Sensors.

Tks for the heads up, will abandon this idea. My side mirror does closed after I press n hold for few seconds.

[shawnsheridan]

Originally Posted by rob116

...My side mirror does closed after I press n hold for few seconds.

[Adh0610]

Hello Shawnsheridan!
I was coding on e sys 3.27.1

The FEM BODY cafd wasnt coding and couldnt be found.
After doing some research i found out i could detect cafd and replace and solve it
However that button isn't available after i press on the selected ECU (FEM BODY) or any other ecu. (Its grayed)
I also found out that the version i have is the most recommended and anyone who were having the same problem were told to uninstall their version of e sys and download 3.27.1. Which I already have.
So what could be the the issue? Do i need to get latest ptsdz or launcher pro? Or what else?

I would appreciate if you could help.