Coding made Easy: A step by step procedure

shawnsheridan · 10-14-2020, 11:16 PM

Quote:

Originally Posted by ra_XOr

shawnsheridan Could you please end me the links please?

Thanks

PM sent.

lionflower · 10-19-2020, 02:13 AM

where can i find all the links?

hellhawk741 · 10-19-2020, 07:47 AM

Quote:

Originally Posted by VitorioUA

Is it possible to somehow program the lowering angle of the right mirror when engaging reverse gear?

BimmerCode has this option so I am assuming it can be done through ESYS as well.

shawnsheridan · 10-19-2020, 09:46 AM

Quote:

Originally Posted by lionflower

where can i find all the links?

PM sent.

keeva381 · 10-19-2020, 10:13 PM

Is it possible to pay someone to walk me through coding or meet me in NC for a coding session on a 2021 G06? I'm interested in all the options but would rather spend a few hours (paying for their time) to walk through it!!

jwehman · 10-20-2020, 11:52 AM

Sorry to have to ask this (I've looked, believe me) but does anyone know how I would go about "coding" my new RDC (TPMS) transmitter with E-Sys? My X3 is a 2013 F25. I have all the software/PSdZ, etc downloaded. I'm waiting on the ENET cable (due today).

Thanks in advance!

shawnsheridan · 10-20-2020, 03:07 PM

Quote:

Originally Posted by jwehman

Sorry to have to ask this (I've looked, believe me) but does anyone know how I would go about "coding" my new RDC (TPMS) transmitter with E-Sys? My X3 is a 2013 F25. I have all the software/PSdZ, etc downloaded. I'm waiting on the ENET cable (due today).

Thanks in advance!

RDC Module has no CAFD, it is not a codeable ECU. I would imagine ISTA has a RDC Initialization / Calibration procedure that must be used.

keithx3pilot · 10-22-2020, 08:09 PM

shawnsheridan can you please send me the links too?

shawnsheridan · 10-22-2020, 08:32 PM

Quote:

Originally Posted by keithx3pilot

shawnsheridan can you please send me the links too?

PM sent.

tobyps · 10-24-2020, 12:01 PM

hello, i just installed icam on x3 f25 lci
but i can't find the instrucltion to code whith esys
Thank you for your support

shawnsheridan · 10-24-2020, 12:20 PM

Quote:

Originally Posted by tobyps

hello, i just installed icam on x3 f25 lci
but i can't find the instrucltion to code whith esys
Thank you for your support

PM sent.

tobyps · 10-24-2020, 01:07 PM

I esys operational add 3AG to FA
Then
I don't know what to code

shawnsheridan · 10-24-2020, 01:12 PM

Quote:

Originally Posted by tobyps

I esys operational add 3AG to FA
Then
I don't know what to code

Yes.

tobyps · 10-25-2020, 12:32 AM

hello, icam does not appear in svt.
I do not know how to solve this problem.

jumboller · 10-25-2020, 09:11 AM

Hi shawnsheridan. I'd really appreciate a copy of the links/details if possible. Thank you!

shawnsheridan · 10-25-2020, 09:45 AM

Quote:

Originally Posted by tobyps

hello, icam does not appear in svt.
I do not know how to solve this problem.

Is it retrofitted? Do you use Read (ECU) and not Read (VCM)?

shawnsheridan · 10-25-2020, 09:46 AM

Quote:

Originally Posted by jumboller

Hi shawnsheridan. I'd really appreciate a copy of the links/details if possible. Thank you!

PM sent.

tobyps · 10-25-2020, 10:35 AM

yes, it is a retrofit a icam , I understand that we must add a resistance of 120 ohms between canH and canL. i will buy one .

Marcethemage · 10-29-2020, 11:22 AM

shawnsheridan is it possible for me to have the links too?
Thanks in advance

shawnsheridan · 10-29-2020, 12:03 PM

Quote:

Originally Posted by Marcethemage

shawnsheridan is it possible for me to have the links too?
Thanks in advance

PM sent.

shirewoodshirts · 10-29-2020, 12:45 PM

Hi looking for info how to re enable carplay on my F36 GC. I had this but using Bimmercode app could not access the NBT HU so decided (foolishly) to restore backup. This has tripped out my Carplay.

I have a 5 - 5 digit code which was provided when it was installed.

Q how easy is it to add carplay back I have the ENET cable

Any help appreciated

shawnsheridan · 10-29-2020, 12:47 PM

Quote:

Originally Posted by shirewoodshirts

Hi looking for info how to re enable carplay on my F36 GC. I had this but using Bimmercode app could not access the NBT HU so decided (foolishly) to restore backup. This has tripped out my Carplay.

I have a 5 - 5 digit code which was provided when it was installed.

Q how easy is it to add carplay back I have the ENET cable

Any help appreciated

Just rerun using same 5 -5 Code.

10-19-2020, 02:13 AM	#2796
lionflower Registered 0 Rep 1 Posts Drives: 2014 F30 335xi Join Date: Oct 2020 Location: Dallas, Texas iTrader: (0)	where can i find all the links?
	Appreciate 0 Quote

10-19-2020, 10:13 PM	#2799
keeva381 Private First Class 37 Rep 153 Posts Drives: 2021 BMW X6 G06 X40i Join Date: Oct 2018 Location: Charlotte, NC iTrader: (0)	Is it possible to pay someone to walk me through coding or meet me in NC for a coding session on a 2021 G06? I'm interested in all the options but would rather spend a few hours (paying for their time) to walk through it!!
	Appreciate 0 Quote

10-20-2020, 11:52 AM	#2800
jwehman Registered 0 Rep 3 Posts Drives: '13 X3 3.5i M-Sport Join Date: Dec 2018 Location: Colorado iTrader: (0)	Sorry to have to ask this (I've looked, believe me) but does anyone know how I would go about "coding" my new RDC (TPMS) transmitter with E-Sys? My X3 is a 2013 F25. I have all the software/PSdZ, etc downloaded. I'm waiting on the ENET cable (due today). Thanks in advance!
	Appreciate 0 Quote

10-22-2020, 08:09 PM	#2802
keithx3pilot Keith 0 Rep 1 Posts Drives: BMW X3 G01 Join Date: Oct 2020 Location: Hong Kong iTrader: (0)	shawnsheridan can you please send me the links too?
	Appreciate 0 Quote

10-24-2020, 12:01 PM	#2804
tobyps New Member 0 Rep 9 Posts Drives: bmw x3 f25 xline 2015 Join Date: Apr 2019 Location: FRANCE iTrader: (0)	hello, i just installed icam on x3 f25 lci but i can't find the instrucltion to code whith esys Thank you for your support
	Appreciate 0 Quote

10-24-2020, 01:07 PM	#2806
tobyps New Member 0 Rep 9 Posts Drives: bmw x3 f25 xline 2015 Join Date: Apr 2019 Location: FRANCE iTrader: (0)	I esys operational add 3AG to FA Then I don't know what to code
	Appreciate 0 Quote

10-25-2020, 12:32 AM	#2808
tobyps New Member 0 Rep 9 Posts Drives: bmw x3 f25 xline 2015 Join Date: Apr 2019 Location: FRANCE iTrader: (0)	hello, icam does not appear in svt. I do not know how to solve this problem.
	Appreciate 0 Quote

10-25-2020, 09:11 AM	#2809
jumboller Registered 0 Rep 1 Posts Drives: f30 Join Date: Oct 2020 Location: uk iTrader: (0)	Hi shawnsheridan. I'd really appreciate a copy of the links/details if possible. Thank you!
	Appreciate 0 Quote

10-25-2020, 10:35 AM	#2812
tobyps New Member 0 Rep 9 Posts Drives: bmw x3 f25 xline 2015 Join Date: Apr 2019 Location: FRANCE iTrader: (0)	yes, it is a retrofit a icam , I understand that we must add a resistance of 120 ohms between canH and canL. i will buy one .
	Appreciate 0 Quote

10-29-2020, 11:22 AM	#2813
Marcethemage Registered 0 Rep 1 Posts Drives: BMW 120d xDrive F20 Join Date: Oct 2020 Location: Turin iTrader: (0) Garage List 2014 BMW 120d xDrive [0.00]	shawnsheridan is it possible for me to have the links too? Thanks in advance
	Appreciate 0 Quote

10-29-2020, 12:45 PM	#2815
shirewoodshirts New Member 0 Rep 5 Posts Drives: BMW F36 Join Date: Jul 2019 Location: United Kingdom iTrader: (0)	Help reinstalling Carplay Hi looking for info how to re enable carplay on my F36 GC. I had this but using Bimmercode app could not access the NBT HU so decided (foolishly) to restore backup. This has tripped out my Carplay. I have a 5 - 5 digit code which was provided when it was installed. Q how easy is it to add carplay back I have the ENET cable Any help appreciated
	Appreciate 0 Quote