Coding made Easy: A step by step procedure

nz_bmw1 · 10-28-2017, 08:07 PM

Hi all,
I have just got an enet cable, installed esys 3.27.1, psdzdata and esys launcher premium on laptop running 32bit windows 10.
Im trying to generate a fsc code for map upgrade.
I can connect to the car, but i cant type anything in the parameter fields on esys...There is no room to type - see attached image. When i try to click identify nothing happens, nothing auto-populates. Have also tried doing this on an old winXP desktop but the same result. Can anyone point me in the right direction? Thank you - tom.

Almaretto · 10-28-2017, 08:09 PM

Quote:

Originally Posted by nz_bmw1

Hi all,
I have just got an enet cable, installed esys 3.27.1, psdzdata and esys launcher premium on laptop running 32bit windows 10.
Im trying to generate a fsc code for map upgrade.
I can connect to the car, but i cant type anything in the parameter fields on esys...There is no room to type - see attached image. When i try to click identify nothing happens, nothing auto-populates. Have also tried doing this on an old winXP desktop but the same result. Can anyone point me in the right direction? Thank you - tom.

Do you have high resolution screen? Did you try hi-res fix in launcher?

nz_bmw1 · 10-28-2017, 08:43 PM

omg.. All i had to do was maximize the screen. Fail. Thank you so much for the response. Cheers.

Almaretto · 10-28-2017, 08:59 PM

Quote:

Originally Posted by nz_bmw1

omg.. All i had to do was maximize the screen. Fail. Thank you so much for the response. Cheers.

nz_bmw1 · 10-29-2017, 02:44 PM

Hi, I've now managed to generate FSC codes for my 2014 x3, but none of them are correct. I have tried around 30.
I'm looking for 2017-australia/new Zealand Next maps.
According to the fsc generator help files it says the parameters should be 0xAA 0x07 (or above). I tried quite a few codes from 0x01 up to 0x12 and none worked.
Then I read on here I should read the info_map.imp file. I did that and found it should be 0xAA 0x2A. I have tried quite a few parameters around those numbers as well and no luck.
I'm just about to go back and re generate the FSC file perhaps I accidently deleted a character somewhere - but can anyone confirm what the parameters should be for me please?
Thanks - Tom.

Almaretto · 10-29-2017, 03:27 PM

Quote:

Originally Posted by nz_bmw1

Hi, I've now managed to generate FSC codes for my 2014 x3, but none of them are correct. I have tried around 30.
I'm looking for 2017-australia/new Zealand Next maps.
According to the fsc generator help files it says the parameters should be 0xAA 0x07 (or above). I tried quite a few codes from 0x01 up to 0x12 and none worked.
Then I read on here I should read the info_map.imp file. I did that and found it should be 0xAA 0x2A. I have tried quite a few parameters around those numbers as well and no luck.
I'm just about to go back and re generate the FSC file perhaps I accidently deleted a character somewhere - but can anyone confirm what the parameters should be for me please?
Thanks - Tom.

00AA002A is correct
00AA002E for 2018

rjhilton56 · 11-19-2017, 05:12 PM

thanks!

E60525d · 12-09-2017, 10:33 AM

Hi, I am trying to connect my F25 to E sys using a Enet cable but having difficulty.

When I click connect, CONNECTION VIA VIN is greyed out. It also says NO ZGW AVAILABLE.

I used this guide for the install - http://www.bmwesys.com/guides/Beginn...e%20Coding.pdf

Any ideas please? I am using E-sys 3.28.1

shawnsheridan · 12-09-2017, 10:37 AM

Quote:

Originally Posted by E60525d

Hi, I am trying to connect my F25 to E sys using a Enet cable but having difficulty.

When I click connect, CONNECTION VIA VIN is greyed out. It also says NO ZGW AVAILABLE.

I used this guide for the install - http://www.bmwesys.com/guides/Beginn...e%20Coding.pdf

Any ideas please? I am using E-sys 3.28.1

You will not be able to connect via VIN unless PSdZData is properly installed, and the Car and Laptop have a connection. For this:

1) The Target Connection Window should not be blank (It should show multiple target connections for different chassis')
2) ENET Cable must be good and making good contact in OBDII Port
3) Car must have proper voltage (Make sure motor is running if car is not on a Charger).
4) Laptop must not have Firewall or any Antivirus software running.
5) PC Lan Adapter should get a fallback IP address of 169.254.xxx.xxx (Make sure it is using DHCP and does not have a Static IP address assigned to it)

E60525d · 12-09-2017, 11:03 AM

Quote:

Originally Posted by shawnsheridan

You will not be able to connect via VIN unless PSdZData is properly installed, and the Car and Laptop have a connection. For this:

1) The Target Connection Window should not be blank (It should show multiple target connections for different chassis')
2) ENET Cable must be good and making good contact in OBDII Port
3) Car must have proper voltage (Make sure motor is running if car is not on a Charger).
4) Laptop must not have Firewall or any Antivirus software running.
5) PC Lan Adapter should get a fallback IP address of 169.254.xxx.xxx (Make sure it is using DHCP and does not have a Static IP address assigned to it)

Thank you, very helpful reply.

Can i question point 5, how do i check my fallback IP address?

Also on point 1, even when I am not connected, should CONNECTION VIA VIN not be greyed out? For me, this is always greyed out which suggests my issue is software related?

E60525d · 12-09-2017, 12:15 PM

Quote:

Originally Posted by E60525d

Thank you, very helpful reply.

Can i question point 5, how do i check my fallback IP address?

Also on point 1, even when I am not connected, should CONNECTION VIA VIN not be greyed out? For me, this is always greyed out which suggests my issue is software related?

All working now, turned car off, waited 30 mins and tried again.

shawnsheridan · 12-09-2017, 12:33 PM

Quote:

Originally Posted by E60525d

Thank you, very helpful reply.

Can i question point 5, how do i check my fallback IP address?

Also on point 1, even when I am not connected, should CONNECTION VIA VIN not be greyed out? For me, this is always greyed out which suggests my issue is software related?

Check IP Address of your LAN Adapter, and see if it is 169.254.xxx.xxx.

If you are not Connected, Connect VIA VIN will always be Grayed Out, but Co

nnection targets shoudl be showing.

Quote:

Originally Posted by E60525d

All working now, turned car off, waited 30 mins and tried again.

E60525d · 12-09-2017, 03:37 PM

Thanks mate, appreciate your efforts in trying to resolve this.

I have managed to code several options which are all working inc digital speedo, sport displays, etc.

One thing I cant seem to find is the auto start stop memory. I want it to remember the last position when you switch engine on. Any idea on what it is?

shawnsheridan · 12-09-2017, 03:49 PM

Quote:

Originally Posted by E60525d

Thanks mate, appreciate your efforts in trying to resolve this.

I have managed to code several options which are all working inc digital speedo, sport displays, etc.

One thing I cant seem to find is the auto start stop memory. I want it to remember the last position when you switch engine on. Any idea on what it is?

Do you not find in CAS module TC_MSA_MEMORY or TCM_MSA_MEMORY?

E60525d · 12-10-2017, 06:50 AM

Quote:

Originally Posted by shawnsheridan

Do you not find in CAS module TC_MSA_MEMORY or TCM_MSA_MEMORY?

Thank you, I will try that. I was told that was under FEM BODY which I dont have. I will check in CAS.

I am also after a few more codes;

- Hold lock button to fold mirrors
- Hold unlock button to unfold mirrors
- Kombi shows what gear when in sport or drive

- Is it possible to code Eco Pro on MY12 F25?

Thanks

shawnsheridan · 12-10-2017, 08:25 AM

Quote:

Originally Posted by E60525d

Thank you, I will try that. I was told that was under FEM BODY which I dont have. I will check in CAS.

I am also after a few more codes;

- Hold lock button to fold mirrors
- Hold unlock button to unfold mirrors
- Kombi shows what gear when in sport or drive

- Is it possible to code Eco Pro on MY12 F25?

Thanks

The mirror coding should be in E-Sys Cheat Codes (CAS and FRM modules).

It is not possible to display gear unless you are in Manual (Paddle-Shift) mode.

You cannot Code ECO Pro to work 100%.

///M_Monster · 12-10-2017, 10:22 PM

Hi Shawn! I will soon have a 2018 F80 ZCP M3. Can you send me what's needed so I can start to do my homework on coding? ?

Marekw · 01-05-2018, 06:12 AM

Hi, I am trying to code my F25 (2016) via E sys using a Enet cable but having difficulty with valid token and pin. Can somebody help me please...? How can I get valid token? thank you

shawnsheridan · 01-05-2018, 07:08 AM

Quote:

Originally Posted by ///M_Monster

Hi Shawn! I will soon have a 2018 F80 ZCP M3. Can you send me what's needed so I can start to do my homework on coding? ?

PM sent.

shawnsheridan · 01-05-2018, 07:09 AM

Quote:

Originally Posted by Marekw

Hi, I am trying to code my F25 (2016) via E sys using a Enet cable but having difficulty with valid token and pin. Can somebody help me please...? How can I get valid token? thank you

E-Sys Launcher PREMIUM was end of life 12-31-2017.

http://f30.bimmerpost.com/forums/sho...1&postcount=15

Now, you must use Launcher PRO 3.x.

One needs to email Developer TokenMaster (fxx token master @gmail.com without the spaces), and then be patient after that.

E60525d · 01-05-2018, 07:15 AM

Esys is no longer free. You have to pay for it now.

shawnsheridan · 01-05-2018, 07:18 AM

Quote:

Originally Posted by E60525d

Esys is no longer free. You have to pay for it now.

No, not exactly. No one should be paying for E-Sys.

E-Sys Launcher PREMIUM was discontinued. E-Sys Launcher PRO is Donationware ($50 to charity of YOUR CHOICE, not the Developer / 2.5 Years Validity).

10-28-2017, 08:07 PM	#2311
nz_bmw1 New Member 0 Rep 5 Posts Drives: 2014 X3 Join Date: Sep 2017 Location: NZ iTrader: (0)	Hi all, I have just got an enet cable, installed esys 3.27.1, psdzdata and esys launcher premium on laptop running 32bit windows 10. Im trying to generate a fsc code for map upgrade. I can connect to the car, but i cant type anything in the parameter fields on esys...There is no room to type - see attached image. When i try to click identify nothing happens, nothing auto-populates. Have also tried doing this on an old winXP desktop but the same result. Can anyone point me in the right direction? Thank you - tom. Attached Images
	Appreciate 0 Quote

10-28-2017, 08:43 PM	#2313
nz_bmw1 New Member 0 Rep 5 Posts Drives: 2014 X3 Join Date: Sep 2017 Location: NZ iTrader: (0)	omg.. All i had to do was maximize the screen. Fail. Thank you so much for the response. Cheers.
	Appreciate 0 Quote

10-29-2017, 02:44 PM	#2315
nz_bmw1 New Member 0 Rep 5 Posts Drives: 2014 X3 Join Date: Sep 2017 Location: NZ iTrader: (0)	Hi, I've now managed to generate FSC codes for my 2014 x3, but none of them are correct. I have tried around 30. I'm looking for 2017-australia/new Zealand Next maps. According to the fsc generator help files it says the parameters should be 0xAA 0x07 (or above). I tried quite a few codes from 0x01 up to 0x12 and none worked. Then I read on here I should read the info_map.imp file. I did that and found it should be 0xAA 0x2A. I have tried quite a few parameters around those numbers as well and no luck. I'm just about to go back and re generate the FSC file perhaps I accidently deleted a character somewhere - but can anyone confirm what the parameters should be for me please? Thanks - Tom.
	Appreciate 0 Quote

11-19-2017, 05:12 PM	#2317
rjhilton56 Registered 0 Rep 1 Posts Drives: X3 Join Date: Aug 2017 Location: UK iTrader: (0)	thanks!
	Appreciate 0 Quote

12-09-2017, 10:33 AM	#2318
E60525d Lieutenant Colonel 289 Rep 1,533 Posts Drives: 330d M Sport LCI Join Date: Mar 2010 Location: UK iTrader: (0)	Hi, I am trying to connect my F25 to E sys using a Enet cable but having difficulty. When I click connect, CONNECTION VIA VIN is greyed out. It also says NO ZGW AVAILABLE. I used this guide for the install - http://www.bmwesys.com/guides/Beginn...e%20Coding.pdf Any ideas please? I am using E-sys 3.28.1
	Appreciate 0 Quote

12-09-2017, 03:37 PM	#2323
E60525d Lieutenant Colonel 289 Rep 1,533 Posts Drives: 330d M Sport LCI Join Date: Mar 2010 Location: UK iTrader: (0)	Thanks mate, appreciate your efforts in trying to resolve this. I have managed to code several options which are all working inc digital speedo, sport displays, etc. One thing I cant seem to find is the auto start stop memory. I want it to remember the last position when you switch engine on. Any idea on what it is?
	Appreciate 0 Quote

12-10-2017, 10:22 PM	#2327
///M_Monster Private 11 Rep 55 Posts Drives: 2018 F80 M3 ZCP (on order) Join Date: Oct 2011 Location: Tampa, FL iTrader: (0)	Hi Shawn! I will soon have a 2018 F80 ZCP M3. Can you send me what's needed so I can start to do my homework on coding? ?
	Appreciate 0 Quote

01-05-2018, 06:12 AM	#2328
Marekw New Member 2 Rep 5 Posts Drives: BMW X3 F25 Join Date: Nov 2017 Location: Slovakia iTrader: (0)	Hi, I am trying to code my F25 (2016) via E sys using a Enet cable but having difficulty with valid token and pin. Can somebody help me please...? How can I get valid token? thank you
	Appreciate 0 Quote

01-05-2018, 07:15 AM	#2331
E60525d Lieutenant Colonel 289 Rep 1,533 Posts Drives: 330d M Sport LCI Join Date: Mar 2010 Location: UK iTrader: (0)	Esys is no longer free. You have to pay for it now.
	Appreciate 0 Quote