Coding made Easy: A step by step procedure

PerryGunn · 04-09-2017, 01:29 AM

Success - I’ve found the function that controls the tailgate opening only when the car is unlocked

The clue was in the HO-Wort - ENKF (Unlock boot vehicle)

Using the NCD/CAFD Tool, I found that this affected two functions in the CAS module
CLM 3002 > ENTRIEGELN_OEFFNUNG_HECKKLAPPE = nicht_aktiv [Default]
CLM 3002 > HK_GESPERRT_IN_GESICHERT = nicht_aktiv [Default]

Thanks to VikingOne, I was able to compare my car with one that allowed the fob to open the tailgate without first unlocking the car

The key function was HK_GESPERRT_IN_GESICHERT which was set to active on my car
The comment for this is ‘Entriegln der HKL nur wenn Fahrzeug Entriegelt (alt England-Logic)’ - assuming HKL is an abbreviation of heckklappe (tailgate) this translates as ‘Unlock the tailgate only if the vehicle is unlocked’ - which is a fairly obvious pointer...

Setting HK_GESPERRT_IN_GESICHERT to nicht_aktiv restores the old behaviour and I can now open the tailgate from the fob without first unlocking the car

NB I also had to remove HO-Wort OENE which is not normally present but had been added by BMW when they were trying to remedy the tailgate issue

avera813 · 04-10-2017, 12:41 AM

Does anyone have a copy of E-Sys I can download, please? Just got a F25 and looking to change some of the settings on the car.

Almaretto · 04-10-2017, 01:07 AM

Quote:

Originally Posted by avera813

Does anyone have a copy of E-Sys I can download, please? Just got a F25 and looking to change some of the settings on the car.

PM Sent

avera813 · 04-11-2017, 10:23 AM

Does anyone have a copy of E-Sys Premium with token generator? I have a copy but it requires an activation code. I don't remember doing that last time. Let me know if you've run across this.

shawnsheridan · 04-11-2017, 10:27 AM

Quote:

Originally Posted by avera813

Does anyone have a copy of E-Sys Premium with token generator? I have a copy but it requires an activation code. I don't remember doing that last time. Let me know if you've run across this.

If in Control Panel the Region is set to United States, and the Language is set to English (United States), and Time Zone is set for a U.S. Time Zone, then Launcher PREMIUM should not ask for an Activation Code. Also remove any secondary language for the keyboard input if installed.

avera813 · 04-11-2017, 11:27 AM

Quote:

Originally Posted by shawnsheridan

If in Control Panel the Region is set to United States, and the Language is set to English (United States), and Time Zone is set for a U.S. Time Zone, then Launcher PREMIUM should not ask for an Activation Code. Also remove any secondary language for the keyboard input if installed.

Just checked because I am running a Win10 vm on my mac. The issue persists. Should I try to download the software from a different link or something else?

shawnsheridan · 04-11-2017, 11:32 AM

Quote:

Originally Posted by avera813

Just checked because I am running a Win10 vm on my mac. The issue persists. Should I try to download the software from a different link or something else?

Don't bother. TM has made it so all VM's require activation code. So, you can wait on it from TM, or find a Windows PC.

avera813 · 04-11-2017, 11:56 AM

Thanks Shawn. Found a PC to do this on instead.

zhoudaniell · 04-14-2017, 01:49 PM

Quote:

Originally Posted by Almaretto

Autozoom requires HU_NBT2
You cannot disable alarm tilt sensor if you remove initiation delay

"alarm tilt sensor", is that the antitheft alarm? I guess if that goes off now, what are my options for disabling it? I definitely like the fact that the mirrors now close right away!

Almaretto · 04-14-2017, 04:04 PM

Quote:

Originally Posted by zhoudaniell

"alarm tilt sensor", is that the antitheft alarm? I guess if that goes off now, what are my options for disabling it? I definitely like the fact that the mirrors now close right away!

That is for if you park car in lift or leave pet in car, alarm will not go off when car rocked.

zhoudaniell · 04-14-2017, 10:42 PM

Quote:

Originally Posted by Almaretto

That is for if you park car in lift or leave pet in car, alarm will not go off when car rocked.

oh got it. So you're saying, if it goes off now, I have no way to disable it whatsoever? I don't have any pets that I'd bring in the car and leave in there, so I guess thats good.

Almaretto · 04-14-2017, 11:00 PM

Quote:

Originally Posted by zhoudaniell

oh got it. So you're saying, if it goes off now, I have no way to disable it whatsoever? I don't have any pets that I'd bring in the car and leave in there, so I guess thats good.

I am saying that there are multiple levels of security, such as in a home alarm:

"Away" with all sensor enabled (Windows/Doors/motion/etc)
"Stay" with exterior sensors enabled but motion turned off. You do not have to worry about triggering siren when you get up for water.

Vehicle alarm is still enabled, but (tilt) movement due to pet or carport elevator will normally set off. With zero initiation delay, you cannot disable tilt sensor.

View post on imgur.com

So, if you do not need ability to disable by pressing lock twice within 10s, then do not worry about it.

throxy · 07-18-2017, 08:00 PM

Shawn, could you send me the information needed to start coding. Thanks!

shawnsheridan · 07-18-2017, 08:02 PM

Quote:

Originally Posted by throxy

Shawn, could you send me the information needed to start coding. Thanks!

You cannot Send or Receive PM's yet. Send me one when you can.

emark204 · 07-28-2017, 09:43 PM

I have E-Sys 3.24.3 and v55.1 PSdZData from a couple of years ago that I used to successfully code my 2014 328i. I just purchased a 2014 X3 xDrive35i. Am I good to go with coding my X3 with this setup? Or do I need to update my software/database?

shawnsheridan · 07-28-2017, 09:45 PM

Quote:

Originally Posted by emark204

I have E-Sys 3.24.3 and v55.1 PSdZData from a couple of years ago that I used to successfully code my 2014 328i. I just purchased a 2014 X3 xDrive35i. Am I good to go with coding my X3 with this setup? Or do I need to update my software/database?

Update. PM sent.

emark204 · 07-29-2017, 03:02 PM

Quote:

Originally Posted by shawnsheridan

Update. PM sent.

Got the update, installed, and coded my X3 options the way I want. Thanks Shawn!

shawnsheridan · 07-29-2017, 03:03 PM

Quote:

Originally Posted by emark204

Got the update, installed, and coded my X3 options the way I want. Thanks Shawn!

E92Mazing · 08-04-2017, 09:28 PM

Hi all,

Joining the club tomorrow in a 17 35i xDrive! Wondering if the 17s are able to be coded?

Almaretto · 08-04-2017, 09:44 PM

Quote:

Originally Posted by E92Mazing

Hi all,

Joining the club tomorrow in a 17 35i xDrive! Wondering if the 17s are able to be coded?

All BMW's are able to be coded.

E92Mazing · 08-04-2017, 10:07 PM

Quote:

Originally Posted by Almaretto

All BMW's are able to be coded.

OK great! I thought I had read somewhere in the past about the newest NAVI being unable to be coded (yet). Thanks for the quick response!

Almaretto · 08-04-2017, 10:49 PM

Quote:

Originally Posted by E92Mazing

OK great! I thought I had read somewhere in the past about the newest NAVI being unable to be coded (yet). Thanks for the quick response!

Certain speed based functions cannot be coded or are limited. However, most functions can still be coded.

04-09-2017, 01:29 AM	#2267
PerryGunn Idiot-in-chief 31 Rep 218 Posts Drives: around: in: circles: Join Date: Sep 2014 Location: United Kingdom iTrader: (0) Garage List 2005 Alpina Roadste ... [8.00] 2017 BMW X3 30d M ... [0.00] 2015 BMW X3 20d M ... [0.00]	Success - I’ve found the function that controls the tailgate opening only when the car is unlocked The clue was in the HO-Wort - ENKF (Unlock boot vehicle) Using the NCD/CAFD Tool, I found that this affected two functions in the CAS module CLM 3002 > ENTRIEGELN_OEFFNUNG_HECKKLAPPE = nicht_aktiv [Default] CLM 3002 > HK_GESPERRT_IN_GESICHERT = nicht_aktiv [Default] Thanks to VikingOne, I was able to compare my car with one that allowed the fob to open the tailgate without first unlocking the car The key function was HK_GESPERRT_IN_GESICHERT which was set to active on my car The comment for this is ‘Entriegln der HKL nur wenn Fahrzeug Entriegelt (alt England-Logic)’ - assuming HKL is an abbreviation of heckklappe (tailgate) this translates as ‘Unlock the tailgate only if the vehicle is unlocked’ - which is a fairly obvious pointer... Setting HK_GESPERRT_IN_GESICHERT to nicht_aktiv restores the old behaviour and I can now open the tailgate from the fob without first unlocking the car NB I also had to remove HO-Wort OENE which is not normally present but had been added by BMW when they were trying to remedy the tailgate issue __________________ X3 F25 LCI 30d M Sport Alpina Roadster S
	Appreciate 0 Quote

04-10-2017, 12:41 AM	#2268
avera813 New Member 0 Rep 6 Posts Drives: 2012 BMW 328i Luxury Line Join Date: Dec 2014 Location: United States iTrader: (0)	Where to get E-Sys Does anyone have a copy of E-Sys I can download, please? Just got a F25 and looking to change some of the settings on the car.
	Appreciate 0 Quote

04-11-2017, 10:23 AM	#2270
avera813 New Member 0 Rep 6 Posts Drives: 2012 BMW 328i Luxury Line Join Date: Dec 2014 Location: United States iTrader: (0)	Does anyone have a copy of E-Sys Premium with token generator? I have a copy but it requires an activation code. I don't remember doing that last time. Let me know if you've run across this.
	Appreciate 0 Quote

04-11-2017, 11:56 AM	#2274
avera813 New Member 0 Rep 6 Posts Drives: 2012 BMW 328i Luxury Line Join Date: Dec 2014 Location: United States iTrader: (0)	Thanks Shawn. Found a PC to do this on instead.
	Appreciate 0 Quote

07-18-2017, 08:00 PM	#2279
throxy Registered 0 Rep 1 Posts Drives: 2015 328d sports wagon Join Date: Jul 2017 Location: CT iTrader: (0)	Shawn, could you send me the information needed to start coding. Thanks!
	Appreciate 0 Quote

07-28-2017, 09:43 PM	#2281
emark204 Registered 0 Rep 4 Posts Drives: 2014 328i red sport line Join Date: Mar 2015 Location: NC iTrader: (0)	I have E-Sys 3.24.3 and v55.1 PSdZData from a couple of years ago that I used to successfully code my 2014 328i. I just purchased a 2014 X3 xDrive35i. Am I good to go with coding my X3 with this setup? Or do I need to update my software/database?
	Appreciate 0 Quote

08-04-2017, 09:28 PM	#2285
E92Mazing Private First Class 30 Rep 145 Posts Drives: 2011 E92 M3 Join Date: Apr 2011 Location: NYC iTrader: (0) Garage List 2020 BMW X3 M40i [0.00] 2017 BMW X3 [0.00] 2014 BMW 328 xDrive [0.00] 2011 BMW M3 E92 [9.00]	Hi all, Joining the club tomorrow in a 17 35i xDrive! Wondering if the 17s are able to be coded?
	Appreciate 0 Quote