[shawnsheridan]

Originally Posted by zhoudaniell

Oh interesting. Im charging my computer and will try again in a few hours.

Any thoughts on my previous question about the intros animation?

No, I don't know any way to delay the system start after unlocking the doors.

[zhoudaniell]

Originally Posted by shawnsheridan

Yes, .EST Token has a Validity Period, but this has nothing to do with Connection to car. .EST Token is used only post connection and for FDL Coding only.

Any idea why I still can't connect? The cable is legit, and has been working up until today. I'm not getting any connection notifications on the bottom right of windows 10 either when I connected my car to the Pc. Can't quite figure out what I'm doing wrong

EDIT: tried connecting a normal ethernet to the computer, and it takes it. So I don't think the problem is the computer.

This is what the car port looks like - does it look normal? Not sure if I should be concerned that I can see gold plates in a couple of the slots, but not all of them.

View post on imgur.com

If it is normal, then I'm wondering if the cable literally just gave out after a few uses? Is that common?

[shawnsheridan]

Originally Posted by zhoudaniell

Any idea why I still can't connect? The cable is legit, and has been working up until today. I'm not getting any connection notifications on the bottom right of windows 10 either when I connected my car to the Pc. Can't quite figure out what I'm doing wrong

EDIT: tried connecting a normal ethernet to the computer, and it takes it. So I don't think the problem is the computer.

This is what the car port looks like - does it look normal? Not sure if I should be concerned that I can see gold plates in a couple of the slots, but not all of them.

View post on imgur.com

If it is normal, then I'm wondering if the cable literally just gave out after a few uses? Is that common?

No idea, really. It could very well be the cable. I always have a spare as backup in case. Being less than $20 a cable, its worth it.

[zhoudaniell]

Originally Posted by shawnsheridan

No idea, really. It could very well be the cable. I always have a spare as backup in case. Being less than $20 a cable, its worth it.

Ok, I ordered another one and I'll see what's up.

My PC went through a windows update as well. Even for some reason if the firewall or antivirus was reenabled, or any of the other points that are listed to make sure are set before using E-sys, the "connection" should technically still exist right?

[shawnsheridan]

Originally Posted by zhoudaniell

Ok, I ordered another one and I'll see what's up.

My PC went through a windows update as well. Even for some reason if the firewall or antivirus was reenabled, or any of the other points that are listed to make sure are set before using E-sys, the "connection" should technically still exist right?

Not quite sure what you are asking, but if the Firewall or Anti Virus, including Windows Defender, was somehow re-enabled, then Ethernet Port could have been blocked, so no connection.

[zhoudaniell]

Originally Posted by shawnsheridan

Not quite sure what you are asking, but if the Firewall or Anti Virus, including Windows Defender, was somehow re-enabled, then Ethernet Port could have been blocked, so no connection.

Would it block all things entering the ethernet port, or just the enet cable? my ethernet for my router still worked well with the port.

[shawnsheridan]

Originally Posted by zhoudaniell

Would it block all things entering the ethernet port, or just the enet cable? my ethernet for my router still worked well with the port.

Normally Firewall will block specific port. If for example it blocked Port 6801, then only ENET Connection would be affected.

[zhoudaniell]

Originally Posted by shawnsheridan

Normally Firewall will block specific port. If for example it blocked Port 6801, then only ENET Connection would be affected.

Hm, ok. yeah I disabled firewall and windows defender, and it still didn't detect an ethernet connection. Hoping that it's an issue with the cable.

Does this look off to you at all? I want to make sure its not on the car side of things - not sure if there's supposed to be gold plates on every little hole or not.

View post on imgur.com

[shawnsheridan]

Originally Posted by zhoudaniell

Hm, ok. yeah I disabled firewall and windows defender, and it still didn't detect an ethernet connection. Hoping that it's an issue with the cable.

Does this look off to you at all? I want to make sure its not on the car side of things - not sure if there's supposed to be gold plates on every little hole or not.

View post on imgur.com

No, not every connector. ENET has only a few wires, so only those would need contacts.

[zhoudaniell]

Originally Posted by shawnsheridan

No, not every connector. ENET has only a few wires, so only those would need contacts.

ok good, because that'd be even a bigger issue. Thanks Shawn, I'm really hoping that it's just the cable then. Should be able to retest next week.

[shawnsheridan]

Originally Posted by zhoudaniell

ok good, because that'd be even a bigger issue. Thanks Shawn, I'm really hoping that it's just the cable then. Should be able to retest next week.

Ok, good luck.

[PerryGunn]

Hi - just got car back from dealer who has recoded some modules

Getting an error when reading coding data from CAFD files

New I-Step is F025-17-03-503 so I'm guessing that I need new psdzdata files (my current version is from v.60.0_PSdZData_Lite and E-Sys 3.28.1 with Launcher 2.6.2.124)

If I need a new version can I have a link to the latest please?

Thanks very much

[Almaretto]

Originally Posted by PerryGunn

Hi - just got car back from dealer who has recoded some modules

Getting an error when reading coding data from CAFD files

New I-Step is F025-17-03-503 so I'm guessing that I need new psdzdata files (my current version is from v.60.0_PSdZData_Lite and E-Sys 3.28.1 with Launcher 2.6.2.124)

If I need a new version can I have a link to the latest please?

Thanks very much

PM Sent

[PerryGunn]

Originally Posted by Almaretto

PM Sent

Thank You

[Almaretto]

Originally Posted by PerryGunn

Thank You

Anytime

FYI: TM's Links (Launcher & NCD / CAFD Tool) & my Psdzdata links never change.

[PerryGunn]

Originally Posted by Almaretto

Anytime

FYI: TM's Links (Launcher & NCD / CAFD Tool) & my Psdzdata links never change.

Excellent - that's very useful to know

BTW, the car was in for them to try to fix the 'tailgate button on fob won't release/open tailgate unless doors are unlocked first' issue I mentioned a few pages back - before they had it the first time the tailgate button on the remote would unlock the doors and open the powered tailgate, now we have to press the unlock button first then the tailgate button - first world problem I know, but it's irritating when it worked before

They couldn't do it - but the car has come back with HO-Wort OENE (Automatic trunk lid can be opened only when car is unlocked) set - it wasn't there at all before

I tried removing it and setting HO-Wort OEOE (Automatic trunk lid can be opened while car is locked) using the process mentioned here
http://bmw-f-coding.blogspot.co.uk/2...vo-coding.html
but when I got to the step '5. Right-Click on FA at top of VO => Calculate FP' I got an error saying something along the lines of OEOE wasn't recognised

It's strange as the manual mentions that, in some regions, there is an iDrive menu (under Locks) that sets the unlocking behaviour of the tailgate - but it's not present in the UK models... I've been hunting to see if anyone has posted anything about enabling this menu but haven't been able to find anything... yet... the search goes on...

[Almaretto]

Originally Posted by PerryGunn

Excellent - that's very useful to know

BTW, the car was in for them to try to fix the 'tailgate button on fob won't release/open tailgate unless doors are unlocked first' issue I mentioned a few pages back - before they had it the first time the tailgate button on the remote would unlock the doors and open the powered tailgate, now we have to press the unlock button first then the tailgate button - first world problem I know, but it's irritating when it worked before

They couldn't do it - but the car has come back with HO-Wort OENE (Automatic trunk lid can be opened only when car is unlocked) set - it wasn't there at all before

I tried removing it and setting HO-Wort OEOE (Automatic trunk lid can be opened while car is locked) using the process mentioned here
http://bmw-f-coding.blogspot.co.uk/2...vo-coding.html
but when I got to the step '5. Right-Click on FA at top of VO => Calculate FP' I got an error saying something along the lines of OEOE wasn't recognised

It's strange as the manual mentions that, in some regions, there is an iDrive menu (under Locks) that sets the unlocking behaviour of the tailgate - but it's not present in the UK models... I've been hunting to see if anyone has posted anything about enabling this menu but haven't been able to find anything... yet... the search goes on...

You can configure some of those settings in Idrive. Calculate FP checks against FP tables.

[PerryGunn]

Originally Posted by Almaretto

Calculate FP checks against FP tables.

Sorry - you've lost me there...

I thought the software calculated the FP - do I have to do something other than

- Edit the FA
- Remove the old HO-Wort (OENE)
- Add the new HO-Wort (OEOE)
- rt-click and 'Calculate FP'

I'll try it again with the new Psdzdata that you provided

Looking at that table, I wonder what ENKF (Unlock boot vehicle) is?

Thanks

Perry

[Almaretto]

Originally Posted by PerryGunn

Sorry - you've lost me there...

I thought the software calculated the FP - do I have to do something other than

- Edit the FA
- Remove the old HO-Wort (OENE)
- Add the new HO-Wort (OEOE)
- rt-click and 'Calculate FP'

I'll try it again with the new Psdzdata that you provided

Looking at that table, I wonder what ENKF (Unlock boot vehicle) is?

Thanks

Perry

Calculate FP only checks that items in FA are valid (ie present in an FP lookup table), but not if variables are conflicting (eg, Bower's & Wilkin & Harman Kardon system in same vehicle). The previous pasted image shows valid F025 options.

FP tables are found here: C:\Data\psdzdata\swe\fafp
fafp_0000062c is F025 table.

[PerryGunn]

Originally Posted by Almaretto

Calculate FP only checks that items in FA are valid (ie present in an FP lookup table), but not if variables are conflicting (eg, Bower's & Wilkin & Harman Kardon system in same vehicle). The previous pasted image shows valid F025 options.

FP tables are found here: C:\Data\psdzdata\swe\fafp
fafp_0000062c is F025 table.

Ah, so the F25 doesn't support OEOE - that's a bugger...

I'll keep looking for a way to enable the iDrive tailgate locking options menu - it's mentioned in the F25 owners manual so it must be there somewhere...

ATB

Perry

[RolaNoCalhau]

Hi Shawn,
Was trying to code ACSM module but the CAFD file wasn't generated - it says "not found".
Perhaps I'm using old software...
Can you PM newest one?
Tks

[Almaretto]

Originally Posted by PerryGunn

Ah, so the F25 doesn't support OEOE - that's a bugger...

I'll keep looking for a way to enable the iDrive tailgate locking options menu - it's mentioned in the F25 owners manual so it must be there somewhere...

ATB

Perry

If you are talking about idrive menu, check vehicle settings.