Front License Bracket vice drilling in my MSport - XBimmers

Gerber92 · 06-17-2012, 07:43 PM

Used a front bracket for a license plate I bought at Autozone. It's only for $9 and work like a charm. I did not drill any hole on my bumper

StrykerX3M · 09-30-2012, 04:26 AM

Quote:

Originally Posted by Gerber92

Used a front bracket for a license plate I bought at Autozone. It's only for $9 and work like a charm. I did not drill any hole on my bumper

can you post a picture of it please?

DonC · 10-02-2012, 11:25 PM

I just had a motorized plate installed. No holes, no plate but push a button and the plate folds out from under the bumper.

E60orBust · 10-03-2012, 06:50 PM

Quote:

Originally Posted by Gerber92

Used a front bracket for a license plate I bought at Autozone. It's only for $9 and work like a charm. I did not drill any hole on my bumper

Did the same thing. Just brought the X back from the dealer who mistakenly drilled holes in the front to mount the plate. They were quite accommodating to fill and repair the damage.

More mods to come. Lots of lytes getting upgraded

Alfred143 · 11-07-2012, 01:56 AM

Quote:

Originally Posted by DonC

I just had a motorized plate installed. No holes, no plate but push a button and the plate folds out from under the bumper.

I purchased the non motorized retractable license plate. Was yours easy to bolt on the bottom?

morrisryanc · 11-07-2012, 02:08 AM

Quote:

Originally Posted by DonC

I just had a motorized plate installed. No holes, no plate but push a button and the plate folds out from under the bumper.

Would like to know about install process. Also, post photos/part # when you can.

kozzi · 11-07-2012, 08:51 PM

I would like to see photos... but found this before

06-17-2012, 07:43 PM	#1
Gerber92 New Member Drives: 2013 2.8 M Sport Join Date: May 2012 Location: San Diego ca Posts: 14 iTrader: (0)	Front License Bracket vice drilling in my MSport Used a front bracket for a license plate I bought at Autozone. It's only for $9 and work like a charm. I did not drill any hole on my bumper
	Tweet

11-07-2012, 08:51 PM	#7
kozzi Pygocentrus Piraya Drives: 2011 BMW X3 35i Join Date: Feb 2011 Location: Brooklyn, NY Posts: 137 iTrader: (0)	I would like to see photos... but found this before __________________ kozzi 2011 BMW F25 35i Deep Sea Blue Metallic/Nevada Mojave/Brushed Aluminum/SAP/DHP/309 Run-Flats

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-02-2012, 11:25 PM	#3
DonC Second Lieutenant Drives: 2013 X3 3.5i M sport, etc Join Date: Aug 2012 Location: near Seattle Posts: 242 iTrader: (0)	I just had a motorized plate installed. No holes, no plate but push a button and the plate folds out from under the bumper.