You're in an X3, right? Remove the underbelly cover, stiffening plate, both mounting points on the DP, DP clamp, remove O2 plugs at harness connection and clip mounts at back of head/block. Then undo the band clamp at the slip joint on exhaust to DP. Trying to remember if I removed my motor mount for this, or just jacked up the motor 3/8" with a floor jack and piece of 2x8. The motor mount for sure came out for the PS2 install. That's all by memory, but seems accurate.
__________________
F25 X3 35i M Sport | Frankenfold 6662 | VRSF Race IC | FTP CP | BM3 tuned | XDI-35 HPFP | Stage 2 LPFP | Ethanol mixed | WMI | Oil cooler | xHP | X5/550i brakes
|