Quote:
Originally Posted by RhoXS
I took delivery of my 2011 CPO this weekend and now working through having a good working knowedge of the iDrive system. There are two things I cannot figure out.
1. - I want to save a particular destination (my home) into one of the memory buttons so when it is pushed the Nav system sets itself up to take me home. It was no problem programming the address book into a button but I have been unable to program a specific destination. Can this be done and if so how?
2. - Page 137 of the manual has a section called "Gas station recommendation". By pushing "1 'Navigation', 2 'Route information', and 3 'Recommended refuel', the remaining range is calculated and gas stations along the route are displayed. I do not see "Route Information" after pressing "Navigation". What am I missing as the manual certainly cannot be wrong.
|
With regards to 1, you need to go into the nav itself as if you were about to start navigation. IIRC at the final step (before 'accept destination) you need to highlight the address you want and then press and hold the button you want to assign it to. Worked for me here the other side of the pond. Good luck!