Quote:
Originally Posted by bluedevils
turn rear wiper on with a shot of cleaning solution = push stock all the way forward past the "bump" feel and let the stock spring back.
turn rear wiper on without shot of cleaning solution = push stock forward just a little past the "bump" feel and let the stock spring back
turn of rear wiper = pull stock back just past the "bump" feel. Going further than that will turn it off, but it will turn on the front wiper cleaning solution/3 wipes.
I hope that helps
|
Thanks, I'll definitely try that again when I get home from work this evening. Normally I can sense those pressure points easily, but did not notice them on wiper stalk. I'll let you know if this works or not.