Quote:
Originally Posted by jponline77
Hi,
When I try to connect, no "target selector" comes up in the E-SYS connector dialog. I do see my VIN number in the "connect VIA VIN". The "connect" button does not highlite to allow me to press. I have disabled firewall and anti-virus.
Any idea what might be the problem?
Thanks,
JP
|
If the "Open Connection" window under "Target" is empty (no targets), verify the following:
- That the "psdzdata" folder is installed properly (From the PSdZData_Lite or PSdZData_Full extraction, copy the "psdzdata" folder to "C:\Data\" (i.e. "C:\Data\psdzdata")
- That the psdzdata chassis folders each have an empty "dist" folder. Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:
- C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\I001\I001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\K001\K001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\KE01\KE01_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\RR01\RR01_xx_xx_xxx\od x\dist
- The the E-Sys "Options" => "Settings" => "Directories => Data: path" is set properly (e.g. "C:\Data")