XBimmers | BMW X3 Forum - View Single Post - Coding made Easy: A step by step procedure

droftrah · 02-16-2013, 04:35 PM

Ok so I was experimenting with changing the brightness of the front turn signals which I changed to leds. I set FRM | 3060 | FRA_V from (wert_03_13,5V; werte=87) to the 100% option. It made them flicker and didn't do anything else, stupid me. So oh well, I tried to set the code back to (wert_03_13,5V; werte=87) and it WAS NOT AN OPTION, the only option was (wert_05_13,5V; werte=87) and that option still flickers the sidemarker opposite to the activated turn signal!

How do I get back to wert_03_13,5V; werte=87?

OR How do I restore my last coding backup that I made with April1's Copy_CAF_v2?

Whichever one will do the trick of reverting this code.
Thanks a bunch!

02-16-2013, 04:35 PM	#527
droftrah Private First Class 61 Rep 182 Posts Drives: '18 G01 X3 M40i Join Date: Oct 2012 Location: Baltimore, MD iTrader: (0) Garage List 2018 BMW X3 M40i [0.00]	restoring cafd files? Ok so I was experimenting with changing the brightness of the front turn signals which I changed to leds. I set FRM \| 3060 \| FRA_V from (wert_03_13,5V; werte=87) to the 100% option. It made them flicker and didn't do anything else, stupid me. So oh well, I tried to set the code back to (wert_03_13,5V; werte=87) and it WAS NOT AN OPTION, the only option was (wert_05_13,5V; werte=87) and that option still flickers the sidemarker opposite to the activated turn signal! How do I get back to wert_03_13,5V; werte=87? OR How do I restore my last coding backup that I made with April1's Copy_CAF_v2? Whichever one will do the trick of reverting this code. Thanks a bunch!
	Appreciate 0 Quote