Hi,
I have just recently bought an X3 30d (registered in October 2013, UK model) and am very happy with it. The only thing I want that it doesn’t have, however, is enhanced Bluetooth with office.
I have the professional Nav system (609) and the hands free facility (6NH), and believe I need to change the 6NH option to 6NS.
I have read on this thread how to do it but I have never done this before so, as not to brick my new car, I am hoping that one of you gurus could review my procedure below and advise if I have understood it all correctly.
Follow your initial instructions:
1. ENET cable
2. E-Sys software 3.26.1 with EST token and Pin
3. psdzdata 54.2
4. A dedicated laptop with Windows 7 with minimum 16 GB of free space
And install.
Then use the document (E-Sys – How to change FA in F-series car.pdf), attachment, posted by ShawnSheridan in this post:
http://f30.bimmerpost.com/forums/sho...65&postcount=9
for guidance.
I have the following question:
In step 6, it says delete/add FA from the SALAPA element. In my case, I assume I will see 6NH in the window and all I have to do is delete and replace with 6NS? Then just follow the instruction thereafter?
As I say, all I want to do in update to enhanced BT with office so do not want to do more than I have to, or risk any trouble.
I would also appreciate a link to the required software noted above.
Many thanks in advance.
Mark