Quote:
Originally Posted by mge.92
Can you send pictures of what you did
|
My first try here on the forum:
1. Dismount solenoid and disconnect it from electrical connection.
2. Disconnect hose to exhaust valve from the solenoid.
3. Disconnect vacuum income hose from plastic vacuum tubing leading to the engine. This connection located about 100 mm out of solenoid down.
4. As for now we have male plastic connector so as female rubber hose one
5. Let's join them and have vacuum circuit ready.
6. Mount solenoid with 100 mm empty hose back to the mount and connect it to the electrical connector to have no errors.
P.S. BUT after I did that I noticed that my left exhaust tube keep silence always
By the end I confirm that
default position of the valve on my X3 is OPEN. So in my case easy mod with disconnecting of the electrical connector from the solenoid works good. Let's keep above instruction for the X5 guys who have default closed valve position
...