I got a new RDC module which has no CAFD file, tried to follow the other instructions posted but not getting the option to detect the CAFD from SWF or able to select I level integration. I'm guessing I have nothing programmed to it. Anybody know how I would be able to program otherwise?
So the RDC module on my 2011 X3 (F25) died and I bought a used RDC module from a 2016 X3.
The "TPMS Malfunction" warning still came up after I replaced the module so I figured it needed to be flashed or coded.
I looked into using ISTA-P to "Program" it or Esys to "Flash" it. However, due to the Integration Level being too old, the Program or Flashing will need to update multiple ECUs and potentially update the I Level (which I can't do since I don't have a 70A battery maintainer).
After some research I found some directions about "coding" the RDC module. This worked out for my replacement part as it already has software on it but just missing a CAFD file.
So I followed and updated the instructions below using Esys and everything worked out fine. Hope this help others who have the same problem.
Once connected : -
Expert Mode-Coding
Read FA
Activate FA
Read SVT
Select "Complete Flash" and then choose the I-Level for "Shipment"
Select the 'RDC' ECU
Detect CAFD for SWE (you will see a list of compatible CAFDs)
Choose the CAFD you want (since they are all the same, I chose the latest one)
Click Code
DONE
|