|
Thanks for the answer @TheNine90.
I already figured out the two-stage stop signal, and realized that I needed to change the stops to Europe, it would probably not be possible for a friend to make the two-stage stop signal work like a normal stop + dimensions.
Yes, and by replacing the lamps, the led, too, by an experimental way, realized that it would not be possible to apparently put it in the stops.
The first thing I changed was:
FRM → AUSG_15_BL _L_KALT_UEBERW_AKTIV → nicht_aktiv
FRM → AUSG_15_BL _L_WARM_UEBERW_AKTIV → nicht_aktiv
FRM → AUSG_15_L_IS_LED → active
FRM → AUSG_16_BL _R _KALT_UEBERW_AKTIV → nicht_aktiv
FRM → AUSG_16_BL _R _WARM_UEBERW_AKTIV → nicht_aktiv
FRM → AUSG_16_R _IS_LED → active
This did not help, it gave an error about a brake light malfunction.
I started to understand further, I found how to get rid of the error:
FRM → DRL_MODUS → drl_s (was drl_h)
The error in the footsteps disappeared, but the dipped beam stopped working, as there are halogen lamps. I tried other options for DRL_MODUS, but alas, I realized that if I want LED lamps, I also need to change the headlights at least to xenon.
Here's a story, as a result, I changed only the rear turns and the rear turn on the led.
Maybe there are some thoughts?
|