[April1]

Originally Posted by sfax

You'll need the AV cable run from the armrest to the CIC not to the combox so you don't need to remove any seats, only panels, but it isn't easy.

If you don't have 6NF, you'll also need a different USB port for your armrest that has an AV port and a USB (rather than AUX and USB as you have now). This also means you won't have access to 6NR in the cradle - only when connected to the AV/USB port

You will also need to have the car coded, and depending on your build date, you may need the iDrive software updated first as well.

The only work on the combox is switching a USB port - no wiring

+1 +1