View Single Post
      09-23-2012, 08:21 AM   #20
charlie67
New Member
charlie67's Avatar
United Kingdom
8
Rep
23
Posts

Drives: Porsche, F25
Join Date: May 2012
Location: UK

iTrader: (0)

I found step 9 fiddly. The back of the cover hooks on, but actually I dont think you need to take it right off, as all you are doing is releasing the board and slidding that out.

Also I used the cogs that help rotate the cradle and put then in from the inside at the end to cover their holes.

Other than that it was quite straight forward as long as you have a size 10 and 20 Torx bit. Just take your time. Its a huge improvement.
__________________
F25 X3 xDrive 20d Bluewater, Oyster Nevada Leather, Auto, Prof. Nav, Reversing Camera, DAB, Heated sports seats, etc
Appreciate 0