|
Hi,
After successful halogen to Xenon retrofit there is only one thing left to do: Auto-levelling sensors or ride high sensors have to be installed and wiring connected to the ICM module.
I installed the sensors (front/rear axle left), bought the right connectors, rewired the sensors. Cable have to run underneath the car to the motor compartment and from there via Penetration to the space in vicinity of FRM module....
Then the big job is to remove the complete central console.....in order to get to ICM module which is under the armrest.
Question for Shawn and other coding experts here:
I installed and wired the sensors to ICM according instructions from INPA-D.
However when attempting the initialization via Rheingold/INpa-D....System cant see any sensors connected.
Generally, I thing the wiring is ok, there is maybe problem with coding the ICM
Do I have to code 522 (Xenon) in ICM modul as I have done for FRM?
Are the ICM modules identical for cars with halogen and cars with Xenon?
Thx.
|