Quote:
Originally Posted by dabb1er
You don't need to remove the panel.
There is a small 10mm nut at the top of the amplifier (between the 2 units) - remove that and then push the amplifier up (it will come away from the bracket).
Slide the new amp in and then replace the nut (this is the tricky part with the limited space - be patient and don't drop it).
Re files - I just installed the base OEM settings and then adjusted the distance settings from driver seat to all the speakers.
Dabbler.
|
Ok.. that didn't work. I have a 'TV Modul' directly under the amplifier. I was able to remove the existing amp but the BT amp is taller and hence wont go in.
If I can get the side panel open, I could probably figure out a way to remove the 'TV Modul' and mount that elsewhere.