View Single Post
      11-12-2017, 01:07 PM   #12
hardparker
Father of Frankenfold
299
Rep
531
Posts

Drives: Yo daddy's 2014 X3 M Sport
Join Date: Jan 2017
Location: Albuquerque

iTrader: (2)

Garage List
2013 BMW X1  [0.00]
2014 BMW X3  [0.00]
Quote:
Originally Posted by elf8888 View Post
Any clearance issues on 275/40/19 front wheel like rubbing on the inner fender when full lock turn?
I've noticed a little rubbing noise when in braking in reverse under full lock. It rubs on the middle front of the fender liner just a little, and only under those conditions. The driver's side is the worst. The passenger side doesn't show any noticeable wear.

On the inside, there's tons of clearance. More than inch. I'm pretty sure you could run a 275 to a 295 on a 10" wide wheel, if you were so inclined, up front.
Attached Images
 
__________________
F25 X3 35i M Sport | Frankenfold 6662 | VRSF Race IC | FTP CP | BM3 tuned | XDI-35 HPFP | Stage 2 LPFP | Ethanol mixed | WMI | Oil cooler | xHP | X5/550i brakes
Appreciate 0