|
Installed E-sys s/w (3.18.4) and psdzdata files (48.3) (thanks shawnsheridan !) on WinXP/SP3 laptop. Ignition on, cable connected (thanks April1 !) and I waited until NIC acquired 169.254.xxx.xxx (APIPA) address. ZGW_SEARCH.exe throws pop-up error with banner UDP_Peer and text /!\ Run-time error '126':. After several attempts with same result, I launched E-Sys, waited until it wrote log file, clicked connect button, selected target vehicle 'F25...' and was able to connect and could see that it showed the VIN (so there must be communication). I didn't go any further, since I just wanted to check the cable/connection. Curious why ZGW_SEARCH.exe will not run and if it indicates a problem that might show later during actual coding.
Note: I did not use automated setup but instead installed manually according to: E-Sys - Installation Instructions - v.2.txt
Did I need to do something to EDIABAS.ini file, or something else?
UPDATE: Reload of OS and manual install of E-sys solved run-time error.
__________________
2013 x35i (Space Gray, MSport, CW/CWII, DHP, Premium, Premium Sound, Technology, BMW-Apps)
Retired: '09 C300 4Matic, '09 GTI, '06 750i, '05 C55, '04 R32, '03 M5, '02 GTI, '01 M5, '00 M-Coupe, '00 540i/6, '99 M3 Coupe, '98 M3 Coupe, '96 328i,... '86 4000 CS Quattro... too many to list.
Last edited by noka; 03-07-2013 at 08:15 PM..
|