Quote:
Originally Posted by Wallo
Yes, TMC stands for traffic message channel and is used throughout Europe as a standard to update Nav systems with up to date traffic information. Pretty much every major radio station is part of TMC. It somehow needs to be activated, currently my Nav system does not receive any traffic information. What probably is connected is the a feature that makes the radio "stick" to a station as long as possible while driving. Most stations broadcast on various frequencies, depending on location. There is somewhere a setting that activates this feature, which is standard in Europe.
I successfully changed the radio frequencies to ECE settings and also activated the speed display in the BC. Works beautifully!
Another small issue is a failure message that pops up every time I turn off the engine. It indicates that there is a failure in the "automatic headlight adjustment system" which I don`t have, since it is a US version. Does anybody know where to turn this message off?
|
Yes, I know what TMC stands for, I was just making sure that was the TMC you were referring to.
Check your HU_CIC / TI_CA_TMC setting. I think aktiv = RTTI and nicht aktiv = TMC.
For your KOMBI error, assuming the fault condition no longer exists, to clear the fault code.
1) Launch C:\EDIABAS\Bin\TOOL32.EXE
2) Hit F3
3) Load C:\EDIABAS\Ecu\F01.PRG
4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
5) Hit F5
6) "Results" window should show "JOB_STATUS = OKAY"
Hopefully, Problem Solved.
Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.