Quote:
Originally Posted by VikingOne
On some coding posts it says to set the "werte" and others don't mention to set the "werte" (value) for the same coding function.
Example:
one post says for Close Trunk/Tailgate through button on FOB, code:
HKFM 3010 SCH_TOEHKI aktiv/werte=01
HKFM 3010 TASTER_FBD aktiv/werte=01
Another says just to do:
HKFM 3010 SCH_TOEHKI aktiv
HKFM 3010 TASTER_FBD aktiv
Which is correct? On some coding I've forgotten to code the werte, but the option worked!
Is the value just 00 for off and 01 for on!
|
Werte values are all that ultimately matters, but you can either change drop-downs or wertes. It is also not universal for values (eg 00 for nicht_aktiv).