Quote:
Originally Posted by sbabcock23
Quote:
Originally Posted by Bambazonke
The coding is as follows Left original value right modified value
U_EFF_CL Left: wert_02__aus = 00 Right: wert_08__13,0V = 82
C_CLC_ENA Left: F025_disable = 00 Right: F025_enable = 01
LAMP_MAP_PARA_SATZ_01 Left: BV_F025_wert_99 = 00 00 00 00
Right: BV_F025_wert_02__Cornerlight_ueber_NSW = 07 0E 12 64
LAMP_MAP_PARA_SATZ_02 Left: BV_F025_wert_99 = 00 00 00 00
Right: BV_F025_wert_02__Cornerlight_ueber_NSW = 08 01 12 64
Please note this is for an EU ROW spec car NA spec BMW's may differ
|
Thanks Bambazonke . I did give this a try however as soon as I enable this my high beams no longer work. On another thread, some people are saying that it is only possible with Adaptive Headlights. Do you have AH? |
No I do not have AH but I have Xenon's. I initially VO coded the car with SA524 and then FDL reversed the coding for the AH hardware I did not have and this removed the errors. I think the issue may lie with you having standard halogen headlights. Can you send me your FRM ncd file so I can do a comparison with mine it may give you a lead.
What I would suggest is, assuming you know how to VO code, is add 524 to your Salapa list update your FA and VO code your FRM module. You will get a whole list of errors but at least you will see if corner lighting via the fogs works AND your high beams work. If this works then using the Tokenmaster's tool to compare ncd files reverse the changes via FDL coding the changes that VO coding did for the hardware you don't have ie the turning lamp inside the headlight etc.
Please remember to save a copy of your FRM ncd file BEFORE you VO code and directly after you have done it. Good luck